| Teil no | Hersteller | Application |
|---|
| AD7535JP | ADI | "-0.3 to +17V; 1W; LC2MOS uP-compatible 14-bit DAC. For microprocessor based control systems, digital audio reconstruction" |
| AD9243 | ADI | "Complete 14-Bit, 3 MSPS Monolithic A/D Converter" |
| AD9200KST | ADI | "Complete 10-bit, 20MSPS, 80mW; CMOS A/D converter" |
| ADR421AR-REEL7 | ADI | "18V; ultraprecision low-noise, 2.048V / 2.500V / 3.00V / 5.00V XFET voltage reference. For bettery-powered instrumentation, portable medical instruments, precision data acquisition systems, high resolution converters" |
| ADM3202AN | ADI | "Low power, 3.3V; 450-500mW; RS-232 line driver/receiver. For general purpose RS-232 data link, portable instruments and printers" |
| AD743SQ/883B | ADI | 140dB) |
| AD5335BRU | ADI | "2.5 V to 5.5 V, 500 uA, parallel interface quad voltage-output 10-Bit DACs" |
| DAC8512EP | ADI | 0.3-10V; 50mA; serial input complete 12-bit DAC. For portable instrumentation |
| ADSP-2105KP-55 | ADI | "16-Bit fixed-point DSP microprocessors with on-chip memory, data memory=0.5K, program memory=1K, 13.824 MHz" |
| REF01CP | ADI | 30-40V; precision voltage reference |
| AD53508 | ADI | The AD53508 Is A Dual Channel Parametric Measurement Circuit With Five Current Measurement Ranges And Output Voltage Range Of -4V to +9V |
| AD812AR-REEL | ADI | "18V; 1.3W; dual, current feedback low power Op Amp. For video lint driver, professional cameras, video switchers, special effects" |
| AD8010AR-16-REEL | ADI | "12.6V; 200mA output current high-speed amplifier. For video distribution amplifier, VDSL, xDSL line driver, communications, ATE, instrumentation" |
| ADG417BR | ADI | "44V; 400mW; LCMOS precision mini-DIP analog switch. For precision test equipment, precision instrumentation" |
| AD8303AR | ADI | "0.3-8V; 50mA; dual, serial input complete 12-bit DAC. For portable communications, digitally controlled calibration" |
| DAC8562GBC | ADI | 0.3-10V; 50mA; parallel input complete 12-bit DAC. For digitally controlled calibration and servo control |
| AD8367ARU-REEL-7 | ADI | "5.5V; 200mW; 500MHz, linear-in-dB VGA with AGC detector. For cellular base station, broadband acceess, power amplifier control loops" |
| AD7864AS-1 | ADI | "0.3-7V; 450mW; 4-channel, simultaneous sampling, high speed 12-bit ADC. For AC motor control, inuterrupted power supplies" |
| DAC8562FP | ADI | 0.3-10V; 50mA; parallel input complete 12-bit DAC. For digitally controlled calibration and servo control |
| AD7472 | ADI | "12-Bit, 2.7 V to 5.25 V, 1.5 MSPS Low Power ADC" |
| AD712SQ | ADI | "Dual-precision, low-cost, high-speed, BiFET op amp" |
| AD7569BR | ADI | "-0.3 to +7V; 450mW; LC2MOS complete, 8-bit analog I/O system" |
| ADG438FBN | ADI | 44V; 20-40mA; high performance 4/8-channel fault-protected analog multiplexer |
| AD706 | ADI | Dual Picoampere Input Current Bipolar Op Amp |
| DAC8248FP | ADI | 0-17V; dual 12-bit double-buffered CMOS D/A converter. For multichannel microprocessor-controlled systems |
| AD600AQ | ADI | "Gain range0 to 40dB ;+-7.5V; 600mW; daual, low noise, wideband variable gain amplifier. For ultrasound and sonar time-gain control, high performance audio and RF AGC systems and signal measurement" |
| AD632AD | ADI | +-8 - +-18V; 4-6mW; internally trimmed precision IC multiplier. For high guality analog signal processing |
| AD7533 | ADI | "10-Bit, Multiplying Iout DAC" |
| AD7535AQ | ADI | "-0.3 to +17V; 1W; LC2MOS uP-compatible 14-bit DAC. For microprocessor based control systems, digital audio reconstruction" |
| OP292 | ADI | Dual Single Supply Operational Amplifier |
