| Teil no | Hersteller | Application |
|---|
| AD7569SQ | ADI | -0.3 to +7V; 450mW; LC2MOS complete, 8-bit analog I/O system |
| AD7858LAN | ADI | 0.3-7V; 450mW; single supply, 200kSPS, 8-channel, 12-bit, sampling ADC. For battery-powered systems, pen computers and instrumentation |
| AD75019JP | ADI | -0.5 to +25.2V; 1W; 16 x 16 crosspoint switch array |
| AD7417 | ADI | 4-Channel, 10-Bit ADC with on-Chip Temperature to Digital Converter, I2C, ±1°C Accuracy |
| AD7582BQ | ADI | -0.3 to +17.0V; 1000mW; CMOS 12-bit successive approximation ADC |
| AD9814 | ADI | Low Power 14-Bit, 3-Channel CCD Signal Processor with Progammable Serial Interface and Byte-Wide Data Output Format |
| AD1674BR | ADI | 12-bit 100kSPS A/D converter |
| OP295GP | ADI | 18V; dual/quad rail-to-rail operational amplifier. For battery-operated instrumentation |
| AD5207BRU50-REEL7 | ADI | 0.3-7V; 2-channel, 256-position digital potentiometer |
| AD8671AR | ADI | 36V; precision very low noise low input bias current operational amplifier. For PLL filters, instrumnetation, sensors and controls, professional quality audio |
| AD8174AR-REEL | ADI | 12.6V; 250MHz, 10ns switching multiplexer w/amplifier. For pixel switching for picture-to-picture, LCD and plasma displayes and video routers |
| ADM690AQ | ADI | 0.3-6V; 400-600mW; microprocessor supervisory circuit. For microprocessor systems, computers, controllers |
| AD9844AJST | ADI | 0.3-3.9V; complete 12-bit, 20MSPS CCD signal processor. For digital video camcoders, digital still cameras, PC cameras |
| ADG201HSSQ | ADI | 44V; 470mW; LC2MOS high speed, quad SPST switche |
| AD8013ACHIPS | ADI | 13.2V; single supply, low power triple video amplifier. For LCD displays, video line driver |
| ADG752 | ADI | CMOS, Low Voltage, RF/ Video, SPDT Switch (Single Pole, Double Throw) |
| REF43FJ | ADI | 40V; low power precision voltage reference |
| AD1584 | ADI | 4.096V Micropower, Precisions Series Mode Voltage References |
| EVAL-AD7854CB | ADI | 0.3-7V; 450mW; single supply, 200kSPS 12-bit sampling ADC. For battery-powered systems, pen computers |
| OP297FS-REEL | ADI | 20V; dual low bias current precision operational amplifier. For strain gauge and bridge amplifiers |
| AD684 | ADI | Monolithic quad sample-and-hold amplifier (SHA). It features four complete sampling channels, each controlled by an independent hold command. |
| ADG436BN | ADI | 44V; 20-40mA; dual SPDT switch. For audio and video swithcing and battery powered systems |
| ADG602BRM | ADI | 0.3-3.6V; 2OHm +-5V/5V, SPST switch. For outomatic test equipment, power routing, communication systems, data acquisition systems, etc. |
| AD650 | ADI | Voltage-to-Frequency and Frequency-to-Voltage Converter |
| AD584K | ADI | 40V; 600mW; pin programmable precision voltage reference |
| OP177FS | ADI | 22V; 500mW; ultraprecision operational amplifier |
| AD7715ACHIPS-3 | ADI | 0.3-7V; 450mW; CMOS, 450uA, 16-bit, sigma-delta ADC |
| AD976ABRS | ADI | 25V; 700mW; 16-bit, 100kSPS/200kSPS BiCMOS A/D converter |
| AD7395AN | ADI | 0.3-7V; 50mA; dual, serial input 12/10-bit DAC. For automotive output span voltage, portable communications, digitally controlled calibration, PC peripherals |
| AD637JR-REEL7 | ADI | 500V; 108mW; high precision, wideband true RMS-to-DC converter |
