| Teil no | Hersteller | Application |
|---|
| MAX6318LHUK27DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.700V min, reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX8212MTV | MAXIMIC | Microprocessor voltage monitor with programmable voltage detection. High output current capability. |
| MAX4511ESE | MAXIMIC | Quad, Rail-to-Rail, fault-protected, SPST analog switch. |
| MAX6321HPUK41DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX779LCSA | MAXIMIC | Low-voltage input, step-up DC-DC converter |
| MAX908CSD | MAXIMIC | Dual, high-speed, ultra low-power, single 4.4V to 5.5V supply operation TTL comparator. |
| MAX310EJE | MAXIMIC | CMOS RF/video multiplexer (1-of-8). |
| MXD1000SE45 | MAXIMIC | 5-tap silicon delay line |
| MAX128BEAI | MAXIMIC | Multirange, +5V, 12-bit DAS with 2-wire serial interface. INL(LSB) +1,-1 |
| MAX6303EPA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-low reset, push/pull reset output. |
| MAX6321HPUK39CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6316MUK50AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6377XR28-T | MAXIMIC | Ultra-low-power voltage detector, 2.8V |
| MAX152MJP | MAXIMIC | +3V, 8-bit ADC with 1 micro A power-down |
| MAX528CWG | MAXIMIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX220C/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX321EJA | MAXIMIC | Precision, dual-supply, SPTS analog switch. |
| MAX530ACWG | MAXIMIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1/2. |
| MAX477EPA | MAXIMIC | 300MHz high-speed op amp. |
| MAX6315US50D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 5.00V. Reset timeout period(min) 20ms. |
| MAX6320PUK27BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX188CCWP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6316MUK42CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX336CAI | MAXIMIC | 16-channel, low-leakage, CMOS analog multiplexer. |
| MAX6378UR41-T | MAXIMIC | Ultra-low-power voltage detector, 4.1V |
| MAX6321HPUK50CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX185AENG | MAXIMIC | High-speed 12-bit A/D converter with external reference input. 10 microsec. max conversion time. Linearity(LSB) +-1/2. |
| MAX6317HUK45DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6321HPUK44CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX250EJD | MAXIMIC | +5V powered isolated RS-232 driver/receiver. |
