| Teil no | Hersteller | Application |
|---|
| MAX6307UK40D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.900(min),4.100(max).Nominal timeout period 140ms. |
| MAX817MESA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.40V, active-low reset, backup-battery switchover, power-fail comparator, watchdog input, battery freshness seal. |
| DG309CK | MAXIMIC | Quad, SPST, NC analog switch |
| MX574AKCWI | MAXIMIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 27. |
| MAX863EEE | MAXIMIC | Dual, high-efficiency, PFM, step-up DC-DC controller. |
| MAX336EWI | MAXIMIC | 16-channel, low-leakage, CMOS analog multiplexer. |
| ICM7211IQ | MAXIMIC | Four digit display decoder/driver. LCD, output code - hexadecimal, input configuration - multiplexed 4-bit |
| MAX528CAG | MAXIMIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX4599EXT-T | MAXIMIC | Low-voltage, single-supply +2V to 5.5V operation, SPDT analog switch. |
| MAX1653ESE | MAXIMIC | High-efficiency, PWM, step-down DC-DC controller in 16-pin QSOP |
| MAX6321HPUK49DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6318LHUK36DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.600V min, reset timeout 1.12sec,typ watchdog timeout 6.3ms |
| MAX6307UK33D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.218(min),3.383(max).Nominal timeout period 20ms. |
| MAX6321HPUK31DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX186BCWP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6317HUK27BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 20ms, typ watchdog timeout 1.6ms |
| MAX1243AEPA | MAXIMIC | +2.7V to +5.25V, low-power, 10-bit serial ADCs in SO-8. INL (LSB) +1/2 |
| MAX166BCPP | MAXIMIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1 LSB. |
| MAX178AEWG | MAXIMIC | Calibrated 12-bit ADC with T/H and reference. |
| MAX4275ALESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 5, 1+ (Rf/Dg) noninverting gain 6, -3dB BW 790kHz. |
| MAX1697SEUT-T | MAXIMIC | 60 mA, inverting charge pump with shutdown, 35 kHz. |
| MAX4582ESE | MAXIMIC | Low-voltage, CMOS analog multiplexer (two 4-channel). |
| MAX532ACWE | MAXIMIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1/2 |
| MAX465CWG | MAXIMIC | Two-channel, triple RGB switch and buffer. Voltage gain 2V/V. |
| MAX4101ESA | MAXIMIC | 200MHz -3dB bandwidth(Avcl=2V/V), low-power op amp. |
| MAX4174AFEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 1.5, 1+ (Rf/Dg) noninverting gain 2.5, -3dB BW 1180kHz. |
| MAX902CPD | MAXIMIC | High-speed, low-power voltage comparator |
| MAX753CPE | MAXIMIC | CCFL backlight and LCD contrast controller. Negative LCD contrast. |
| MAX307EWI | MAXIMIC | Precision, dual 8-channel, high-performance, CMOS analog multiplexer |
| MAX6316MUK26DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
