| Teil no | Hersteller | Application |
|---|
| OP07DP | MAXIMIC | Low offset voltage operational amplifier. |
| MAX6315US27D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.70V. Reset timeout period(min) 20ms. |
| ICM7217IPI | MAXIMIC | 4 digit (LED) presettable up/down ciounter |
| MAX325CPA | MAXIMIC | Precision, single-supply, SPST analog switch. |
| MAX4562CEE | MAXIMIC | Serially controlled, clickless audio/video switch. 2-wire IIC-compatible. |
| MAX4664ESE | MAXIMIC | 5om, quad, SPST, CMOS analog switch (four NC switches). |
| MAX378C/D | MAXIMIC | High-voltage, fault-protected analog multiplexer. |
| ICL7116CQ | MAXIMIC | 3 1/2 digit A/D converter with display hold |
| MAX6827VUT-T | MAXIMIC | 1.58 V, dual ultra-low-voltage mP supervisor with manual reset and watchdog timer |
| MAX6317HUK28AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6320PUK45BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX4075CAEUA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 100V/V, noninverting gain 101V/V, -3dB BW 38kHZ. |
| MX7624CPE | MAXIMIC | CMOS 8-bit buffered multiplying DAC. TTL/CMOS compatible at +12V to +15V. Error +-1/2 LSB |
| MX574AKEWI | MAXIMIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 38. |
| MAX6125ESA | MAXIMIC | Low-cost, low-dropout, 3-terminal voltage reference. Preset output voltage 2.5V |
| MAX6321HPUK28CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6317HUK28BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX305ESE | MAXIMIC | Precision, dual, high-speed analog switch. |
| MAX4074BHEUK-T | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 40V/V, noniverting gain 41V/V, -3dB BW 67kHZ. |
| MAX541BCSA | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-2 |
| MAX6320PUK48CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX744AEWE | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. 159kHz to 212.5kHz guaranteed oscillator frequency limits. |
| MAX858C/D | MAXIMIC | 5V or 3.3V output, step-up DC-DC converter. |
| MAX6306UK44D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.270(min),4.490(max) Nominal timeout period 140ms. |
| REF01HF | MAXIMIC | +10V precisioon voltage reference. Max TEMPCO 25ppm/degC. Initial error +-50mV |
| MAX2105CWI | MAXIMIC | Direct-conversion tuner IC for digital DBS applications. |
| MAX3245EEWI | MAXIMIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX3485ECSA | MAXIMIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 12Mbps. Supply voltage 3.0V to 3.6V |
| MAX6346UR41-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 4.100V. Order increment 10k |
| MAX3081ESA | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
