| Teil no | Hersteller | Application |
|---|
| MAX353CPE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX708EPA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Active-high reset output. Precision supply-voltage monitor 4.4V. |
| MAX791CASE | MAXIMIC | Microprocessor supervisory circuit |
| MAX4529CSA | MAXIMIC | Low-voltage, bidirectional RF and video switch. |
| MAX6318MHUK28DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX5157ACEE | MAXIMIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +3V single-supply operation. INL(LSB) +-1. |
| MAX5251AEPP | MAXIMIC | +3V, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2. |
| MAX6321HPUK37CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6318MHUK40AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6310UK50D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max). Nominal timeout period 1120ms. |
| MAX1204AEPP | MAXIMIC | +5V, 8-channel, serial, 10-bit ADC with 3V digital interface, INL (LSB) +1/2 |
| MAX6318LHUK46DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1.12sec,typ watchdog timeout 6.3ms |
| MAX6307UK32D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.120(min),3.280(max).Nominal timeout period 1120ms. |
| MAX527CCWG | MAXIMIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1/2. Fast output settling 5micros. +-5V supply operation. |
| ICL7663AITV | MAXIMIC | Programmable positive voltage regulator |
| MAX441EWP | MAXIMIC | High-speed video multiplexer/amplifier |
| DG423CJ | MAXIMIC | Improved low-pover, CMOS analog switches with latches |
| MAX632BEJA | MAXIMIC | CMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MAX6321HPUK48AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| ICL7650BC/D | MAXIMIC | Chopper-stabilized amplifier |
| MAX1458CAE | MAXIMIC | 1%-accurate, digitally trimmed senor signal conditioner. |
| MAX323CSA | MAXIMIC | Precision, single-supply, SPST analog switch. |
| DG411AK | MAXIMIC | Improved, quad, SPST analog switches |
| MAX6310UK32D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.120(min),3.280(max). Nominal timeout period 1120ms. |
| MAX6806XR46-T | MAXIMIC | Voltage detector. Reset output active-low, push-pull. Threshold reset 4.6V |
| MAX6333UR25D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.5V, reset timeout(min) 1ms. |
| MAX6312UK40D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.900(min) 4.100(max). Nominal timeout period 1120ms. |
| MAX879CPA | MAXIMIC | Step-up/step-down DC-DC converters |
| MAX550ACUA | MAXIMIC | +2.5V to +5.5V, low-power, single, 8-bit voltage-output DAC with an external reference input and an asynchronous load input. |
| MAX932EPA | MAXIMIC | Dual low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference and internal programmable hysteresis.. |
