| Teil no | Hersteller | Application |
|---|
| MAX6319MHUK36C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms |
| MAX6321HPUK40DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX1665SESA | MAXIMIC | Lithium-ion battery pack protector. Cell count 2 |
| MAX6309UK43D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.193(min),4.408(max) Nominal timeout period 1ms. |
| MAX448ACSD | MAXIMIC | Quad high-speed, fast-settling, high output current operational amplifier |
| MAX6318MHUK41BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| HI3-0201HS-9 | MAXIMIC | High-speed, CMOS, quad, SPST analog switch |
| MAX809MEXR-T10 | MAXIMIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 10k increments. |
| MAX3866E/D | MAXIMIC | 2.5Gbps, +3.3V combined transimpedance/limiting amplifier. |
| MAX354EWE | MAXIMIC | Fault-protected analog multiplexer |
| MAX903C/D | MAXIMIC | High-speed, low-power voltage comparator |
| MAX6317HUK42DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6318LHUK46DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1.12sec,typ watchdog timeout 102ms |
| MAX238EWG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6317HUK40DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX951MJA | MAXIMIC | Ultra low-power, single-supply Op Amp + comparator + reference. Internal 1.2V+-2% bandgap reference. Op Amp gain stability 1V/V. Supply current 7microA. |
| MAX6314US36D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.60V. Reset timeout period(min) 1ms. |
| MAX6317HUK36BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX2721EUP | MAXIMIC | 1.7GHz to 2.5GHz, direct I/Q modulator with VGA and PA driver. |
| MAX6316LUK29AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX9051AESA | MAXIMIC | Micropower, single-supply, single comparator + precision reference IC. |
| MAX6317HUK44AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6316MUK25BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX675CTV | MAXIMIC | +5V precision voltage reference. Temp. coefficient 12ppm/degC, Initial error 7mV. |
| MAX184AENG | MAXIMIC | High-speed 12-bit A/D converter with external reference input. 5 microsec. max conversion time. Linearity(LSB) +-1/2. |
| MAX408CPA | MAXIMIC | Single high-speed, fast-settling, high output current operational amplifier |
| MAX4313EUA | MAXIMIC | High-speed, low-power, single-supply, multichannel, video multiplexer-amplifier. No. Of input channel 2. Amplifier gain +2V/V |
| MAX6321HPUK37BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX525BCPP | MAXIMIC | Low-power, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MAX6501CMP045-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +45. |
