| Teil no | Hersteller | Application |
|---|
| DG307BK | MAXIMIC | CMOS dual and quad analog switch. |
| MAX6313UK36D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.510(min) 3.690(max).Nominal timeout period 20ms. |
| MAX803LEXR-T | MAXIMIC | Microprocessor reset circuit Reset threshold 4.63V. Open-drain active-low reset. 2.5k increments. |
| MAX1112EAP | MAXIMIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX5187BEEG | MAXIMIC | 8-bit, 40MHz, current/voltage-output DAC. |
| MAX4074ALESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 5V/V, noniverting gain 6V/V, -3dB BW 71kHZ. |
| IH5341MTW | MAXIMIC | Dual RF and video switch |
| MAX6379XR39-T | MAXIMIC | Ultra-low-power voltage detector, 3.9V |
| MAX317MJA | MAXIMIC | Precision, CMOS analog switch |
| MAX326CEE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX6321HPUK29AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX637AESA | MAXIMIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MAX5013AEQI | MAXIMIC | 12-bit, 100Msps TTL DAC. |
| MAX6307UK47D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.583(min),4.818(max).Nominal timeout period 1120ms. |
| MAX817LCPA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.65V, active-low reset, backup-battery switchover, power-fail comparator, watchdog input, battery freshness seal. |
| MAX1248AMJE | MAXIMIC | +2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX4554C/D | MAXIMIC | Force-sense switches (two force switches, two sence switces and two guard switches configured as two 3PST NO switches). |
| MAX9686CTV | MAXIMIC | Single very fast TTL output comparator |
| MAX530BCWG | MAXIMIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1. |
| MAX6306UK29D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.857(min),3.000(max) Nominal timeout period 140ms. |
| MAX6318MHUK25DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX4053AEPE | MAXIMIC | Low-voltage, CMOS analog switch |
| MAX6321HPUK33BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX319CJA | MAXIMIC | Precision, CMOS analog switch |
| MAX6312UK46D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.514(min) 4.746(max). Nominal timeout period 1120ms. |
| MAX8868EUK29-T | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator with auto discharge function. Preset output voltage 2.84V |
| MAX6343TUT-T | MAXIMIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 3.08V. Open-drain active-low reset output, manual-reset input. |
| MX7521LCWN | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 0.05% |
| MAX6501UKP115-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +115. |
| MAX764EPA | MAXIMIC | -5V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
