| Teil no | Hersteller | Application |
|---|
| MAX674ETV | MAXIMIC | +10V precision voltage reference. Temp. coefficient ppm/degC 15. Initial error 15mV |
| MX7821TQ | MAXIMIC | 660ns microprocessor-compatible, 8-bit ADC with track/hold. |
| MAX5150BC/D | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1. |
| MAX903ESA | MAXIMIC | High-speed, low-power voltage comparator |
| MAX6318LHUK40BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.000V min, reset timeout 20ms,typ watchdog timeout 6.3ms |
| MAX231EJD | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX500AEPE | MAXIMIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-1. |
| MAX6322HPUK40A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms |
| MAX6313UK27D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.633(min) 2.768(max).Nominal timeout period 20ms. |
| MAX861ISA | MAXIMIC | 50mA, Frequency-selectable, switched-capacitor voltage coverter. Input voltage +2.5V to 5.5V |
| MAX4565CWP | MAXIMIC | Quad, low-voltage, bidirectional RF/video switch. |
| MAX815LESA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.65V (max) 4.75V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. |
| MAX189CEWE | MAXIMIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-2. |
| MAX6315US33D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 20ms. |
| MAX9041BEUT-T | MAXIMIC | Micropower, single-supply operation +2.5V to 5.5V, single comparator + precision reference IC. |
| DG303ABWE | MAXIMIC | Quad, TTL compatible CMOS analog switch. |
| MAX4582EEE | MAXIMIC | Low-voltage, CMOS analog multiplexer (two 4-channel). |
| MAX327CEE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX706TEPA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 3.08V. Active-low reset output signal. |
| MAX6318MHUK50CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX5153AEPE | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +3V single-supply operation. INL(LSB) +-1. |
| MAX909ESA | MAXIMIC | Quad, high-speed, ultra low-power, single +-5V supply operation TTL comparator. Internal latch. |
| MAX6316LUK47BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX4144EEE | MAXIMIC | High-speed, low-distortion, differential line receiver. 2V/V internally fixed gain, 130MHz bahdwidth. |
| MAX4016ESA | MAXIMIC | Low-cost, high-speed, single-supply op amp with Rail-to-Rail outputs. High speed 150MHz - 3dB bandwidth. Transistor count 190 . |
| MX7847BN | MAXIMIC | Complete, dual, 12-bit multiplying DAC. 12-bit parallel interface. Error (LSB) +-1/2 |
| MAX4175BEEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 24, 1+ (Rf/Dg) noninverting gain 25, -3dB BW 590kHz. |
| DG418AK | MAXIMIC | Improved, SPST, NO analog switch |
| MAX6712TEXS-T | MAXIMIC | Microprocessor reset circuit with manual reset input. Reset threshold 3.08V. Output type active-high push-pull reset. |
| MAX526CCNG | MAXIMIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1/2. Fast output settling 3micros. |
