| Teil no | Hersteller | Application |
|---|
| MAX6318LHUK26DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.630V min, reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6321HPUK48AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6318MHUK36DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6316LUK34DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX541CEPA | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-4 |
| MAX799CSE | MAXIMIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Regulates negative secondary voltage (such as -5V). |
| MAX805TESA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6320PUK44CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX5155ACPE | MAXIMIC | Low-power, dual, 12-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-1. |
| MAX412CPA | MAXIMIC | Dual, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX6318MHUK35BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX744ACPA | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. 159kHz to 212.5kHz guaranteed oscillator frequency limits. |
| MAX8875EUK30-T | MAXIMIC | Low-dropout, 150mA linear regulator with power-OK output. Preset output voltage 3.0V. |
| MAX4560CPE | MAXIMIC | +-15kV ESD-protected, low-voltage, CMOS analog switch (triple SPDT). |
| MAX170CEPA | MAXIMIC | Serial output 5.6 microsec 12-bit A/D converter. Error +-1/2 LSB. |
| MX7828BQ | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
| MAX1688ESA | MAXIMIC | Step-up DC-DC converter with precise, adaptive current limit for GSM. |
| MAX328CWE | MAXIMIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| MAX5123BEEE | MAXIMIC | +3V, 12-bit, serial, force/sense DAC with 10ppm/C internal reference +1.25V. INL (LSB) +-2. |
| MAX6318LHUK33DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX8860EUA25 | MAXIMIC | Low-dropout, 300mA linear regulator. Vout = +2.50V |
| DG529DN | MAXIMIC | 8-channel latchable multiplexer |
| ICL7642ECWE | MAXIMIC | Quad operational amplifier, 20mV |
| MAX450C/D | MAXIMIC | CMOS video amplifier |
| MAX6357LTUT-T | MAXIMIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 3.08V (Vcc3). Active-low push-pull reset 3V. |
| MAX5480AEEE | MAXIMIC | 8-bit parallel DAC. Error(LSB) +-1/2. |
| MAX3264CUE | MAXIMIC | 3.0V to 5.5V, 1.25Gbps limiting amplifier. |
| MAX800LCSE | MAXIMIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.65V. Guaranteed power-fail accuracy to +-2% |
| MAX6317HUK47BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MX7530LN | MAXIMIC | CMOS 10 bit multiplying D/A converter. Error 0.05% |
