| Teil no | Hersteller | Application |
|---|
| MAX6309UK42D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.095(min),4.305(max) Nominal timeout period 20ms. |
| MAX6375XR26-T | MAXIMIC | Ultra-low-power voltage detector, 2.6V |
| MAX6195CESA | MAXIMIC | Precision, micropower, low-dropout voltage reference. Output voltage 5.000V, initial accuracy +-10, temperature coefficient <25ppm. |
| MAX933CSA | MAXIMIC | Dual low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference and internal programmable hysteresis.. |
| MAX6321HPUK28DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX1297ACEG | MAXIMIC | 265ksps, +3V, 2-channel single-ended/1-channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5, -0.5 |
| MAX6316LUK43CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX186CCCP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6320PUK37AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX038EWP | MAXIMIC | High-frequency waveform generator |
| MAX339C/D | MAXIMIC | Dual 4-channel, low-leakage, CMOS analog multiplexer. |
| MAX901BESE | MAXIMIC | High-speed, low-power voltage comparator |
| MXL1001ACN8 | MAXIMIC | Precision operational amplifier |
| MAX527DMYG | MAXIMIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1. Fast output settling 5micros. +-5V supply operation. |
| MAX163BCWG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX4554CPE | MAXIMIC | Force-sense switches (two force switches, two sence switces and two guard switces configured as two 3PST NO switches). |
| MAX6327UR22-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 2.200V. Standard version. Order increment 2.5k |
| MAX6806UR26-T | MAXIMIC | Voltage detector. Reset output active-low, push-pull. Threshold reset 2.6V |
| MAX157ACPA | MAXIMIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 0.5 |
| MAX5352ACUA | MAXIMIC | Low-power, 12-bit voltage-output DAC with serial interface. INL (LSB) +-1/2. +5V single-supply operation. |
| MAX4502EPA | MAXIMIC | Low-voltage, SPST, CMOS analog switch. |
| MAX408ACPA | MAXIMIC | Single high-speed, fast-settling, high output current operational amplifier |
| MAX6347UR43-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.300V. Order increment 10k |
| MAX3232EEPE | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX333CWP | MAXIMIC | Quad SPDT CMOS analog switch. |
| MAX6357MRUT-T | MAXIMIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset 3V. |
| IH5341MJD | MAXIMIC | Dual RF and video switch |
| MAX6377UR24-T | MAXIMIC | Ultra-low-power voltage detector, 2.4V |
| MAX6320PUK50BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX274AMRG | MAXIMIC | 8th-order continuous-time active filter |
