Path:okDatasheet > Halbleiter Datenblatt > MAXIMIC Datenblatt > MAXIMIC-281
MAX6317HUK48AY-T MX7837BN MAX4162EUK MAX201EWE MAX512ESD MAX275AEWP MAX4690EPE DG444C/D MAX6307UK50D1-T MAX8867C/D33 MAX637BCPA MAX192BEPP MAX984ESE MX7535BQ MAX882CSA MAX8213AESE MAX6318MHUK37AW-T MAX4516C/D MAX801MCPA MAX173ENG MAX6319MHUK26D-T MAX706RCPA MAX907CSA MAX6316MUK46
Teil no | Hersteller | Application |
---|---|---|
MAX208EWG | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
MAX313CSE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
MAX6317HUK48AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
MX7837BN | MAXIMIC | Complete, dual, 12-bit multiplying DAC. 8-bit + 4-bit interface. Error (LSB) +-1/2 |
MAX4162EUK | MAXIMIC | Micropower, single-supply operation at 3V to 5V, Rail-to-Rail I/O op amp. 200kHz gain-bandwidth product. |
MAX201EWE | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
MAX512ESD | MAXIMIC | Low-cost, triple, 8-bit voltage-output DAC with serial interface. |
MAX275AEWP | MAXIMIC | 4th-order continuous-time active filter |
MAX4690EPE | MAXIMIC | 1.25om, quad, SPST, CMOS analog switch (two NO switches). |
DG444C/D | MAXIMIC | Improved, quad, SPST analog switch |
MAX6307UK50D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.875(min),5.125(max).Nominal timeout period 1ms. |
MAX8867C/D33 | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator. Preset output voltage 3.30V |
MAX637BCPA | MAXIMIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
MAX192BEPP | MAXIMIC | Low-power, 8-channel, serial 10-bit ADC. Error(LSB) +-1. |
MAX984ESE | MAXIMIC | Ultra-low-power, open-drain, quad comparator. Internal precision reference 2%. Internal hysteresis no. |
MX7535BQ | MAXIMIC | Microprocessor-compatible, 14-bit DAC. INL +-1 LSB. |
MAX882CSA | MAXIMIC | 3.3V or adjustable, low-dropout, low current, 200mA linear regulator. 7microA standby mode. |
MAX8213AESE | MAXIMIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Open-drain outputs. |
MAX6318MHUK37AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
MAX4516C/D | MAXIMIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally open (NO). |
MAX801MCPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. |
MAX173ENG | MAXIMIC | Complete 5 microsec CMOS 10-bit A/D converter. |
MAX6319MHUK26D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1120ms |
MAX706RCPA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.63V. Active-low reset output signal. |
MAX907CSA | MAXIMIC | Single high-speed, ultra low-power, single 4.4V to 5.5V supply operation TTL comparator. |
MAX6316MUK46BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
MAX157BMJA | MAXIMIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 1 |
IH5050C/D | MAXIMIC | CMOS analog switch. |
MAX6318LHUK46AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,standard version(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1ms,typ watchdog timeout 1.6sec |
MAX6326UR22-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.200V. Standard version, order increment 2500 |