| Teil no | Hersteller | Application |
|---|
| MAX6320PUK46AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX5156BEPE | MAXIMIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +5V single-supply operation. INL(LSB) +-1. |
| MAX6320PUK31AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX512CPD | MAXIMIC | Low-cost, triple, 8-bit voltage-output DAC with serial interface. |
| MAX4074AJEUK-T | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 3V/V, noniverting gain 4V/V, -3dB BW 90kHZ. |
| MAX6310UK39D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.803(min),3.998(max). Nominal timeout period 20ms. |
| MAX1270AEAI | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX4100ESA | MAXIMIC | 500MHz unity-gain bandwidth, low-power op amp. |
| MAX815KCSA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. |
| MAX5153BEEE | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +3V single-supply operation. INL(LSB) +-2. |
| MAX6320PUK28BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX530AENG | MAXIMIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1/2. |
| DG304C/D | MAXIMIC | CMOS dual and quad analog switch. |
| MAX4592CSE | MAXIMIC | High-speed, single-supply 12V, quad, SPST analog switches (four NO switches). |
| MAX808MCPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. CMOS RAM write protection.. |
| MAX1290AEEI | MAXIMIC | 400ksps, +5V, 8-channel, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1/2,-1/2 |
| MX7837AR | MAXIMIC | Complete, dual, 12-bit multiplying DAC. 8-bit + 4-bit interface. Error (LSB) +-1 |
| DG407DN | MAXIMIC | Improved, dual 8-channel CMOS analog multiplexer |
| MAX190AMRG | MAXIMIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1/2. |
| MAX1607ESA | MAXIMIC | USB current-limited switch in pin-compatible package |
| MAX455CPP | MAXIMIC | CMOS 50MHz video amplifier with an on-board multiplexer offering 8-channels |
| MAX6313UK35D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.413(min) 3.588(max).Nominal timeout period 1120ms. |
| MAX237ENG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6317HUK34BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX502BEWG | MAXIMIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4. |
| MAX8213AMJE | MAXIMIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Open-drain outputs. |
| DG200ABK | MAXIMIC | Dual monolithic SPST CMOS analog swith |
| MAX510AEWE | MAXIMIC | Quad, serial 8-bit DAC with Rail-to-Rail output. TUE (LSB) +-1 |
| MAX6318MHUK46BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6319MHUK29C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms |
