| Teil no | Hersteller | Application |
|---|
| MAX691EWE | MAXIMIC | Microprocessor supervisory circuit. |
| MAX4077ESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp/open-loop op amp. |
| MAX6312UK43D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.193(min) 4.408(max). Nominal timeout period 140ms. |
| MAX6318LHUK48CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6360LSUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset 3V. Watchdog timer. Standard version. |
| MAX876ACSA | MAXIMIC | Low-power, low-drift precision voltage reference. 10V+-3.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX6502UKP045-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +45. |
| MAX6310UK38D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.705(min),3.895(max). Nominal timeout period 1120ms. |
| MAX350C/D | MAXIMIC | Serially controlled, low-voltage, dual 4-channel multiplexer |
| MAX4538CPE | MAXIMIC | Quad, low-voltage, SPST analog switches with enable. 2 NO and 2 NC. |
| MAX6320PUK47DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX260ACWG | MAXIMIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MAX7408CPA | MAXIMIC | 5th-order, lowpass, elliptic, switched-capacitor filter. Transition ratio r = 1.6, operating voltage +5V |
| MAX4669EPE | MAXIMIC | 2.5om, quad, SPST, CMOS analog switch (one NC and one NO switches). |
| MAX4175BHEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 40, 1+ (Rf/Dg) noninverting gain 41, -3dB BW 390kHz. |
| MAX186DMJP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX133CQH | MAXIMIC | 3 3/4 digit DMM circuit. 4-bit multiplexed address/data bus. |
| MAX6325ESA | MAXIMIC | Low-noise, +2.5V voltage reference. Max tempco 1.5ppm/C |
| MAX6318LHUK32AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.200V min, reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX1108EUB | MAXIMIC | Single-supply, low-power, 2-channel, serial 8-bit ADC |
| MAX542CMJD | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-4 |
| MAX178BCWG | MAXIMIC | Calibrated 12-bit ADC with T/H and reference. |
| MAX6316MUK39BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX6316LUK47AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX756EPA | MAXIMIC | 3.3V to 5V adjustable-output, step-up DC-DC converter. |
| MAX876BESA | MAXIMIC | Low-power, low-drift precision voltage reference. 10V+-5.0mV output (Ta=25gradC). TEMPCO(max) 20ppm/gradC. |
| MAX6307UK45D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.388(min),4.613(max).Nominal timeout period 140ms. |
| MAX516BMRG | MAXIMIC | Quad comparator with programmable threshold. Error (LSB) +-2 |
| MAX819LCSA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.65V, active-low reset, backup-battery switchover, power-fail comparator, battery freshness seal, manual reset input. |
| MAX6318LHUK49BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 20ms, typ watchdog timeout 102ms |
