| Teil no | Hersteller | Application |
|---|
| MAX973ESA | MAXIMIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 1%. Internal hysteresis yes. |
| MXD1000PA175 | MAXIMIC | 5-tap silicon delay line |
| MAX6318LHUK29AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.930V min, reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6320PUK25AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX211EAI | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX807MCWE | MAXIMIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.425V |
| DG304ABK | MAXIMIC | CMOS dual and quad analog switch. |
| MAX6321HPUK37BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX232ECSE | MAXIMIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX6317HUK40AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6318MHUK38BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX543ACPA | MAXIMIC | CMOS, 12-bit, serial-input multiplying DAC. Linearity (LSB) +-1/2 |
| MAX808LEPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection.. |
| MX7628BQ | MAXIMIC | CMOS dual 8 bit buffered multiplying DAC. +12V to 15V single supply operation. Error +-1/2 LSB. |
| MAX6375XR23-T | MAXIMIC | Ultra-low-power voltage detector, 2.3V |
| MAX6318MHUK30DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX517BCSA | MAXIMIC | 2-wire serial 8-bit single DAC with Rail-to-Rail outputs. TUE(LSB) 1.5. |
| MAX6314US42D2-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.20V. Reset timeout period(min) 20ms. |
| MAX6318MHUK31AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX6318MHUK30DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6316MUK42AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1ms, typ watchdog timeout 102ms |
| ICL7612BCTV | MAXIMIC | Single operational amplifier,5mV |
| MAX3485ESA | MAXIMIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 10Mbps. Supply voltage 3.0V to 3.6V |
| DG425C/D | MAXIMIC | Improved low-pover, CMOS analog switch with latches |
| MAX6320PUK35AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX4508ESE | MAXIMIC | Fault-protected, high-voltage single 8-to-1 multiplexer. |
| MAX924CPE | MAXIMIC | Quad micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. |
| MAX6316LUK30DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MX7821K/D | MAXIMIC | 660ns microprocessor-compatible, 8-bit ADC with track/hold. |
| MAX6315US41D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.10V. Reset timeout period(min) 20ms. |
