| Teil no | Hersteller | Application |
|---|
| MAX6316LUK25DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX2622EUA | MAXIMIC | Monolithic voltage-controlled oscillator. |
| MX584JH | MAXIMIC | Pin programmable precision voltage reference. Error +-30mV. |
| MAX4613CPE | MAXIMIC | Quad, SPST, CMOS analog switch has two NC and two NO switches. |
| MX7847AR | MAXIMIC | Complete, dual, 12-bit multiplying DAC. 12-bit parallel interface. Error (LSB) +-1 |
| MAX4195ESA | MAXIMIC | Micropower, +2.7V single-supple operation, Rail-to-Rail, precision instrumentation amplifier with shutdown. Gain +1V/V. CMRR 95db. |
| MX7533CD | MAXIMIC | CMOS low-cost 10 bit multiplying D/A converter. Error 0.05% |
| MAX799ESE | MAXIMIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Regulates negative secondary voltage (such as -5V). |
| MAX527DCWG | MAXIMIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1. Fast output settling 5micros. +-5V supply operation. |
| MAX166BCWP | MAXIMIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1 LSB. |
| MAX6318LHUK42BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.200V min, reset timeout 20ms,typ watchdog timeout 1.6sec |
| DG529EWN | MAXIMIC | 8-channel latchable multiplexer |
| MAX6319LHUK40B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms |
| MAX6318MHUK43DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6322HPUK47B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms |
| MAX1669EEE | MAXIMIC | Fan controller and remote temperature sensor with SMBus serial interface |
| MX7548 | MAXIMIC | CMOS 8-bit microprocessor compatible 12-bit DAC. Linearity +-1 LSB. |
| MAX3483C/D | MAXIMIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0.25Mbps. Supply voltage 3.0V to 3.6V |
| MAX4542CPA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX364CSE | MAXIMIC | Precision, quad, SPST, normally closed (NC) analog switch. |
| DG390ABK | MAXIMIC | General purpose CMOS quad analog switch. |
| MAX3085ESA | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| DG384BWE | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX695MJE | MAXIMIC | Microprocessor supervisory circuit. |
| ICL7653MJA | MAXIMIC | Chopper-stabilized amplifier |
| MAX3292CSD | MAXIMIC | RS-485/RS-422 transceiver with preemphasis for high-speed, long-distance communication. |
| MXL1016MJ8 | MAXIMIC | Ultra-fast precision TTL comparator. 10ns typ high-speed. |
| MAX6320PUK41DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6316MUK46AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| DG529AK | MAXIMIC | 8-channel latchable multiplexer |
