| Teil no | Hersteller | Application |
|---|
| LH0101AK | MAXIMIC | Power operational amplifier |
| MX7545GLN | MAXIMIC | CMOS 12-bit buffered multiplying DAC. Error +-1/2 LSB. +-1 LSB gain accuracy. |
| MAX6316LUK40AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX690EPA | MAXIMIC | Microprocessor supervisory circuit. |
| MAX220ESE | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| IH5141MJE | MAXIMIC | Low power fast CMOS analog switch. Dual, single pole, single throw (Dual SPST). |
| MAX235MDG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX391MJE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX536BCPE | MAXIMIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-1LSB total unadijusted error. INL (LSB) +-1 |
| MXD1005PD60 | MAXIMIC | 5-tap silicon delay line |
| MAX6335US19D3-T | MAXIMIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 1.9V, reset timeout(min) 100ms. |
| MX7225LP | MAXIMIC | CMOS quad 8-bit D/A converter with double-buffered logic inputs. Error +-1 LSB. |
| MAX6337US22D2-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.2V, reset timeout(min) 20ms. |
| MAX6309UK44D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.270(min),4.490(max) Nominal timeout period 140ms. |
| MX7824KN | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
| MAX6347XR34-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 3.400V. Order increment 10k |
| MAX5353BMJA | MAXIMIC | Low-power, 12-bit voltage-output DAC with serial interface. INL (LSB) +-4. +3.3V single-supply operation. |
| MX7538JN | MAXIMIC | Microprocessor compatible CMOS, 14-bit D/A converter. Error +-2 LSB. |
| MAX8215EJD | MAXIMIC | +-5V, +-12V dedicated microprocessor voltage monitor. |
| MX7520JQ | MAXIMIC | CMOS 10 bit multiplying D/A converter. Error 0.2% |
| MX584KCSA | MAXIMIC | Pin programmable precision voltage reference. Error +-10mV. |
| MAX706SCUA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.93V. Active-low reset output signal. |
| MAX6318LHUK38AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 1ms,typ watchdog timeout 102ms |
| MAX5151ACPE | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-1. |
| MAX530ACAG | MAXIMIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1/2. |
| MAX5355MJA | MAXIMIC | 10-bit voltage-output DAC. +3.3V single supply operation. |
| MAX4615CSD | MAXIMIC | Low-woltage, high-speed, quad, SPST, CMOS analog switch has four NC switches. |
| MAX366CSA | MAXIMIC | Signal-line circuit protector. |
| MAX528EPP | MAXIMIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX604EPA | MAXIMIC | 3.3V or adjustable, low-dropout, low quiescent currrent, 500mA linear regulator. |
