| Teil no | Hersteller | Application |
|---|
| MAX6321HPUK50AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX6317HUK48DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6327UR24-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 2.400V. Order increment 10k |
| ICL8069ACSA | MAXIMIC | Low-voltage reference, 10 ppm/C - max temp. coefficient. |
| MX7507TQ | MAXIMIC | Differential, 8 channel (2 of 16) monolithic CMOS analog multiplexer. |
| MAX195AMDE | MAXIMIC | 16-bit, 85ksps ADC with 10 microA shutdown |
| IH5048AC/D | MAXIMIC | CMOS analog switch. |
| MAX5013AEQI | MAXIMIC | 12-bit, 100Msps TTL DAC. |
| MAX6320PUK45CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX8211CPA | MAXIMIC | Microprocessor voltage monitor with programmable voltage detection. Define output current limit. |
| MAX873AESA | MAXIMIC | Low-power, low-drift precision voltage reference. 2.5V+-1.5mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MX674AKEWI | MAXIMIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 38. |
| MAX146BC/D | MAXIMIC | +2.7 V, low-power, 8-channel, serial 12-bit ADC. INL(LSB) +-1. |
| MAX4552EEE | MAXIMIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NO switches). |
| MAX6318LHUK49CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6307UK38D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.705(min),3.895(max).Nominal timeout period 1120ms. |
| MAX6319LHUK47D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1120ms |
| MAX4509ESE | MAXIMIC | Fault-protected, high-voltage dual 4-to-1 multiplexer. |
| MX7828LEAI | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1/2 |
| MAX1623EAP | MAXIMIC | 3A, low-voltage, step-down regulator with synchronous rectification and internal switches |
| MXD1000PA40 | MAXIMIC | 5-tap silicon delay line |
| MAX782SCBX | MAXIMIC | Triple-output power-supply controller for notebook computer. Vout 3.6V |
| MAX653CPA | MAXIMIC | 3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX144AEPA | MAXIMIC | +2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-0.5 |
| MAX417EPA | MAXIMIC | 1.2microA max, dual, single-supply op amp. |
| MX7845KP | MAXIMIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX6316LUK45BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX1259CPE | MAXIMIC | Battery manager |
| MAX432EPA | MAXIMIC | +-15V Chopper-stabilized operational amplifier. |
| MAX6321HPUK41CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
