| Teil no | Hersteller | Application |
|---|
| MAX7705C/D | MAXIMIC | Microprocessor power-supply monitor with reset |
| MAX506BCPP | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Separate input latches for each of its four DACs. TUE +-3/2 LSB. |
| MAX6328XR30-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.000V. Order increment 10k |
| MAX6310UK29D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.857(min),3.000(max). Nominal timeout period 20ms. |
| MAX6318MHUK47BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX700CSA | MAXIMIC | Power-supply monitor with reset. |
| MAX489CPD | MAXIMIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Full-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 32. |
| MAX274AENG | MAXIMIC | 8th-order continuous-time active filter |
| MAX3291ESD | MAXIMIC | RS-485/RS-422 transceiver with preemphasis for high-speed, long-distance communication. |
| MX7524LN | MAXIMIC | CMOS 8-bit buffered multiplying DAC. TTL/CMOS compatible at +5V. Error +-1/8 LSB |
| MAX528C/D | MAXIMIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX6320PUK42BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX4516EPA | MAXIMIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally open (NO). |
| MAX690SESA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX167AEWG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1/2 LSB. |
| MAX6315US42D4-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.20V. Reset timeout period(min) 1120ms. |
| ICL7632ECSE | MAXIMIC | Triple operational amplifier, 20mV |
| MAX188DMJP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6321HPUK29BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| DG304BWE | MAXIMIC | CMOS dual and quad analog switch. |
| MAX6318MHUK29BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX233EPP | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| ICL7621BCTV | MAXIMIC | Dual operational amplifier, 5mV |
| MAX3083CSD | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX6321HPUK27BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6318MHUK47DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX1246BCPE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1,-1 |
| MAX2630EUS-T | MAXIMIC | VHF-to-microwave, +3V, general-purpose amplifier |
| MAX2101CMQ | MAXIMIC | 6-bit quadrature digitizer. |
| MAX6318MHUK43AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
