| Teil no | Hersteller | Application |
|---|
| MAX6318MHUK44DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6317HUK49CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MX7225KP | MAXIMIC | CMOS quad 8-bit D/A converter with double-buffered logic inputs. Error +-2 LSB. |
| MAX4051EPE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
| MAX690RC/D | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6348XR35-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.500V. Order increment 10k |
| MAX312C/D | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX6190BESA | MAXIMIC | Precision, micropower, low-dropout voltage reference. Output voltage 1.250V, initial accuracy +-4, temperature coefficient <10ppm. |
| MAX6320PUK35AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX122AEAG | MAXIMIC | 500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +3/4 |
| MAX6318MHUK27CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6341ESA | MAXIMIC | Low-noise, +4.096V voltage reference. Max tempco 1.5ppm/C |
| MAX6331LUR-T | MAXIMIC | Precision shunt regulator with reset. Reset threshold 4.63V, shunt regulator voltage 5.0V |
| MAX495CSA | MAXIMIC | Single, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX1640C/D | MAXIMIC | Adjustable-output, switch-mode current souces with synchronous rectifier. Current-sense accuracy 5.3% |
| MAX6319MHUK33A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms |
| ICL7652BCPD | MAXIMIC | Chopper-stabilized operational amplifier |
| MAX393CSE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX161BEWI | MAXIMIC | CMOS 8-bit 8-channel data acquisition system. Error 3/4 LSB |
| MAX221CAE | MAXIMIC | +5V, 1microA, single RS-232 transceiver with AutoShutdown. |
| MAX6347UR45-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.500V. Order increment 10k |
| MAX2473EUT-T | MAXIMIC | 500 MHz to 2500 MHz VCO buffer amplifier. |
| MX7543GBD | MAXIMIC | CMOS serial input 12 bit DAC. Error +1/2 LSB. |
| MXD1013PD012 | MAXIMIC | 3-in-1 silicon delay line. Output delay 12ns. |
| MAX793SCPE | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 2.85V to 3.00V. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Battery OK output.Watchdog input.Manual reset inp. |
| MAX4598CPP | MAXIMIC | Low-voltage, CMOS analog IC, combination single-ended 8-to-1/differential 4-to-1 multiplexer. |
| MAX111BEWE | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX6317HUK27DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX6310UK48D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.680(min),4.920(max). Nominal timeout period 1ms. |
| MAX6332UR21D3-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.1V, reset timeout(min) 100ms. |
