| Teil no | Hersteller | Application |
|---|
| MAX275ACWP | MAXIMIC | 4th-order continuous-time active filter |
| MAX178ACNG | MAXIMIC | Calibrated 12-bit ADC with T/H and reference. |
| MAX6713LEXS-T | MAXIMIC | Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low open-drain reset. |
| MAX160EPN | MAXIMIC | Microprocessor compatible 8-bit A/D converter. Fast conversion time 4microsec. Error +-1/2 LSB. |
| MAX253MJA | MAXIMIC | Transformer driver for isolated RS-485 interface. |
| MAX6321HPUK38AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MX574ALN | MAXIMIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 10. |
| MXD1013PA090 | MAXIMIC | 3-in-1 silicon delay line. Output delay 90ns. |
| MAX038C/D | MAXIMIC | High-frequency waveform generator |
| MAX494MJD | MAXIMIC | Quad, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MX7628KN | MAXIMIC | CMOS dual 8 bit buffered multiplying DAC. +12V to 15V single supply operation. Error +-1/2 LSB. |
| TSC427CBA | MAXIMIC | Dual non-inverting power MOSFET driver. |
| IH5142CJE | MAXIMIC | Low power fast CMOS analog switch. Single pole, doube throw (SPDT). |
| MAX260AENG | MAXIMIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MAX6318MHUK29DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| DG406DN | MAXIMIC | Improved, 16-channel CMOS analog multiplexer |
| MAX6351MRUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset output 5V and 3V. |
| MAX962ESA | MAXIMIC | Dual, ultra-high-speed, +3V or +5V, Beyond-the-Rails comparator. |
| MAX6318LHUK29BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.930V min, reset timeout 20ms, typ watchdog timeout 102ms |
| MAX8211EJA | MAXIMIC | Microprocessor voltage monitor with programmable voltage detection. Define output current limit. |
| MAX3485C/D | MAXIMIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 10Mbps. Supply voltage 3.0V to 3.6V |
| MAX6316MUK42BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6376XR25-T | MAXIMIC | Ultra-low-power voltage detector, 2.5V |
| MAX774ESA | MAXIMIC | -5V or adjustable, high-efficiency, low IQ inverting DC-DC controller |
| MAX6318MHUK27DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| ICL7614BCTV | MAXIMIC | Single operational amplifier,5mV |
| MAX4138EWG | MAXIMIC | 1-input/4-output video distribution amplifier. External gain set, 140MHz -3dB bandwidth. |
| MAX780CEAG | MAXIMIC | Dual-slot PCMCIA analog power controller.Reference & Vpp status indicator. Dual Vpp switches & level shifter for Vcc switching. |
| MAX499CWG | MAXIMIC | Triple, SPDT, RGB switches with 250MHz video buffer amplifier |
| MAX122BEAG | MAXIMIC | 500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +1 |
