| Teil no | Hersteller | Application |
|---|
| MAX871C/D | MAXIMIC | Switched-capacitor voltage inverter. Input voltage range +1.4V to +5.5V. 500kHz |
| MAX737C/D | MAXIMIC | -15V, inverting carrent-mode PWM regulator. |
| MAX196BCAI | MAXIMIC | Multirange, single +5V, 12-bit DAS with 12-bit bus interface |
| ICL7652ITV | MAXIMIC | Chopper-stabilized operational amplifier |
| MAX9686CJA | MAXIMIC | Single very fast TTL output comparator |
| MAX6318MHUK38DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6322HPUK28C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms |
| MAX537ACWE | MAXIMIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-5V supply operation. INL (LSB) +-1/2 |
| MAX6310UK50D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max). Nominal timeout period 1ms. |
| MAX312CPE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX4517CSA | MAXIMIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC). |
| MAX806RC/D | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX1672EEE | MAXIMIC | Step-ur/down DC-DC converter in QSOP package |
| OP07AJ | MAXIMIC | Low offset voltage operational amplifier. |
| MAX6319LHUK37C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms |
| MXD1013SE060 | MAXIMIC | 3-in-1 silicon delay line. Output delay 60ns. |
| MAX6321HPUK26DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX262BENG | MAXIMIC | Microprocessor programmable universal active filter. Accuracy 2%. |
| MAX6309UK39D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.803(min),3.998(max) Nominal timeout period 20ms. |
| MAX366MJA | MAXIMIC | Signal-line circuit protector. |
| MAX901BEPE | MAXIMIC | High-speed, low-power voltage comparator |
| MAX6333UR19D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.9V, reset timeout(min) 1ms. |
| MAX6314US37D2-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.70V. Reset timeout period(min) 20ms. |
| MAX815NCPA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. |
| MXD1013UA035 | MAXIMIC | 3-in-1 silicon delay line. Output delay 35ns. |
| MAX6316LUK34CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX6318LHUK31BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX4075BKESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 50V/V, noninverting gain 51V/V, -3dB BW 82kHz. |
| MAX6330SUR-T | MAXIMIC | Precision shunt regulator with reset. Reset threshold 2.78V, shunt regulator voltage 3.0V |
| MAX1092BCEG | MAXIMIC | 400ksps, +5V, 4-channel single-ended/2-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 1 |
