| Teil no | Hersteller | Application |
|---|
| MAX6318MHUK36CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX4075ALEUA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 5V/V, noninverting gain 6V/V, -3dB BW 71kHZ. |
| MAX3222EEUP | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6313UK47D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.583(min) 4.818(max).Nominal timeout period 1120ms. |
| MAX6316MUK48BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX767SEAP | MAXIMIC | 5V-to-3.3V, Synchronous, step-down power-supply controller. Ref. tol. +-1.8%, Vout 3.6V |
| MAX6346UR45-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 4.500V. Order increment 10k |
| MAX4123ESA | MAXIMIC | Single, wide-bandwidth, low-power, single-supply Rail-to-Rail I/O op amp. BW 5MHz. |
| MAX6344RUT-T | MAXIMIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 2.63V. Push-pull active-high reset output, manual-reset input. |
| MAX332MJE | MAXIMIC | Quad SPST CMOS analog switch. |
| MAX820RCSE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy +-2% |
| MAX391MJE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX6310UK36D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.510(min),3.690(max). Nominal timeout period 140ms. |
| MAX6317HUK30AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1ms, typ watchdog timeout 25.6ms |
| MAX3111ECNI | MAXIMIC | SPI/MICROWIRE-compatible UART and +-15kV ECD-protected RS-232 transceiver with internal capacitor. Single-supply operation +3.3V. Vcc (V) 3.3 |
| MAX265BCPI | MAXIMIC | Pin and resistor programmed universal active filter. Accyracy 2% |
| DG407DN | MAXIMIC | Improved, dual 8-channel CMOS analog multiplexer |
| MAX6320PUK28BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX1294ACEI | MAXIMIC | 420ksps, +5V, 6-channel single-ended/3channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5, -0.5 |
| MAX6321HPUK41AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX4547CSE | MAXIMIC | Single,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX6321HPUK43BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6327UR29-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 2.930V. Standard version. Order increment 2.5k |
| MAX696CPE | MAXIMIC | Microprocessor supervisory circuit. Battery backup power switching. |
| MAX6320PUK43AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX305MJE | MAXIMIC | Precision, dual, high-speed analog switch. |
| MAX667CSA | MAXIMIC | +5V/programmable low-dropout voltage regulator |
| DG202BSE | MAXIMIC | Quad SPST CMOS analog switch. |
| MAX6316MUK37BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX4581CSE | MAXIMIC | Low-voltage, CMOS analog multiplexer (8-channel). |
