| Teil no | Hersteller | Application |
|---|
| MAX6311UK00D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,2 additional undervoltage reset inputs,). Nominal timeout period 1ms. |
| MAX6319MHUK35C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms |
| MAX6320PUK28CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX291CSA | MAXIMIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX690C/D | MAXIMIC | Microprocessor supervisory circuit. |
| MAX6320PUK37DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX352CPE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX1240ACPA | MAXIMIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1/2 |
| MAX6336US16D3-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 1.6V, reset timeout(min) 100ms. Standard version |
| MAX4426EJA | MAXIMIC | Dual high-speed, 1.5A MOSFET driver. 4.5V t0 18V operation range. |
| DG305CWE | MAXIMIC | CMOS dual and quad analog switch. |
| MAX743CPE | MAXIMIC | Dual-output, switch-mode regulator (+5V to +/-15V or +/-12V) |
| MAX6355SYUT-T | MAXIMIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 2.93V (Vcc5) and 2.19V (Vcc3). Active-low open-drain reset. Standard version. |
| MAX6346UR42-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 4.200V. Order increment 10k |
| MAX5176BEEE | MAXIMIC | Low-power, serial, 12-bit DAC with voltage output. Single-supply +3V operation. Full-scale output range +4.096V(Vref=+2.5V). INL(LSB) +-4. |
| MAX4633MJE | MAXIMIC | Fault-protected, high-voltage, dual analog switch (two NO DPST switches). Fault protection +-40V with power off, +-36V with +-15V supplies. |
| MAX874C/D | MAXIMIC | 10microA, low-dropout, precision voltage reference. Output voltage 4.096V +-0.2%. Wide operating voltage range 4.3V to 20V. Line regulation over temp. 75microV/V. Load regulation over temp. 1.0mV/mA max |
| MAX4533ESP | MAXIMIC | Quad, Rail-to-Rail, fault-protected, SPDT analog switch. |
| MAX924EPE | MAXIMIC | Quad micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. |
| MAX6318MHUK50AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX6322HPUK33D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1120ms |
| MAX242EWN | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX636AMJA | MAXIMIC | Preset -12V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MAX4511CPE | MAXIMIC | Quad, Rail-to-Rail, fault-protected, SPST analog switch. |
| MAX981CUA | MAXIMIC | Ultra-low-power, open-drain, single comparator. Internal precision reference 2%. Internal hysteresis yes. |
| MAX4168ESD | MAXIMIC | Dual, high-output-drive, precision, low-power, single-supply +2.7V to +6.5V, Rail-to-Rail I/O op amp with swhutdown. |
| ICM7218DI/D | MAXIMIC | 8 digit LED display driver |
| MAX3241ECAI | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX152EWP | MAXIMIC | +3V, 8-bit ADC with 1 micro A power-down |
| MAX409BMJA | MAXIMIC | 1.2microA max, single, single-supply op amp. |
