| Teil no | Hersteller | Application |
|---|
| MAX248C/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX4502CPA | MAXIMIC | Low-voltage, SPST, CMOS analog switch. |
| DG417CY | MAXIMIC | Improved, SPST, NC analog switch |
| MAX529EAG | MAXIMIC | Octal, 8-bit, serial DAC with output buffer. Single +5V or dual +-5V supply opeation. |
| MAX6321HPUK25BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX4565EPP | MAXIMIC | Quad, low-voltage, bidirectional RF/video switch. |
| MAX6378UR36-T | MAXIMIC | Ultra-low-power voltage detector, 3.6V |
| MAX6312UK32D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.120(min) 3.280(max). Nominal timeout period 1ms. |
| MAX117EAI | MAXIMIC | 3 V, 400 ksps, 8-channel, 8-bit ADC |
| MAX6309UK27D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.633(min),2.768(max) Nominal timeout period 20ms. |
| MAX755MJA | MAXIMIC | Negative output, inverting, current-mode PWM regulator. Converts +2.7V to +9V input to adjustable negative output. |
| MAX7411EUA | MAXIMIC | 5th-order, lowpass, elliptic, switched-capacitor filter. Transition ratio r = 1.25, operating voltage +5V |
| MX7845KR | MAXIMIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX9690CJA | MAXIMIC | Ultra-fast ECL-output comparator |
| MAX6320PUK41AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX801NCPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog. |
| MAX923CPA | MAXIMIC | Dual micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. Internal programmable hysteresis. |
| MAX865C/D | MAXIMIC | Compact, dual-output charge pump. |
| MAX900AEPP | MAXIMIC | High-speed, low-power voltage comparator |
| MAX5155AEEE | MAXIMIC | Low-power, dual, 12-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-1. |
| MAX6351LRUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset output 5V and 3V. |
| MAX805RCPA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MX7547BQ | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-3 LSB. |
| MAX4294EUD | MAXIMIC | Quad, ultra-small, single supply +1.8V to +5.5V or dual supples +-0.9V to +-2.75V, micropower, Rail-to-Rail I/O op amp. |
| MAX6316LUK45AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX528CPP | MAXIMIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX328EJE | MAXIMIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| DG306CJ | MAXIMIC | CMOS dual and quad analog switch. |
| MAX5354EPA | MAXIMIC | 10-bit voltage-output DAC. +5V single supply operation. |
| MAX4690EAE | MAXIMIC | 1.25om, quad, SPST, CMOS analog switch (two NO switches). |
