| Teil no | Hersteller | Application |
|---|
| MAX531BCSD | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. Internal 2.048V reference. Flexible output ranges 0V to Vdd, Vss to Vdd, 0V to 2.6V. |
| ICL7126CQH | MAXIMIC | Low power, 3 1/2 digit A/D converter |
| MAX6309UK48D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.680(min),4.920(max) Nominal timeout period 20ms. |
| MAX704RESA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX206CWG | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4522CPE | MAXIMIC | Quad, low-voltage, SPST analog switch. |
| MAX6318MHUK35AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX6305UK00D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, 2 additional undervoltage reset inputs). Nominal timeout period 200ms. |
| MAX174BCWI | MAXIMIC | Industry standard complete 12-bit A/D converter. 8 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO (ppm/C) 27. |
| MAX6316LUK39BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6321HPUK41BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| ICL7136CPI | MAXIMIC | Low power, 3-1/2 digit A/D converter |
| MAX833CWE | MAXIMIC | Fixed output 3V, 1A, step-down, PWM, switch-mode DC-DC regulator. |
| OP90EZ | MAXIMIC | Precision low voltage micropower operational amplifier. |
| MAX6310UK26D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.564(min),2.696(max). Nominal timeout period 140ms. |
| MAX324CSA | MAXIMIC | Precision, single-supply, SPST analog switch. |
| MAX163CC/D | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX138CMH | MAXIMIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MX390KD | MAXIMIC | Quad, 12-bit, microprocessor-compatible DAC. INL(LSBs) +-1/2. |
| MAX6318LHUK38CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 140ms,typ watchdog timeout 102ms |
| MAX6502CMP035-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +35. |
| MAX1687ESA | MAXIMIC | Step-up DC-DC converter with precise, adaptive current limit for GSM. |
| MAX6318MHUK45CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX490MJA | MAXIMIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Full-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - no. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| ICL7641CCPD | MAXIMIC | Quad operational amplifier, 10mV |
| MAX4518CSD | MAXIMIC | Precision, 4-channel, low-voltage, CMOS analog multiplexer. Single-supply operation (+2.2V to +15V) or bipolar-supply operation (+-2.2V to +-8V). |
| MAX4274BAESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 10, 1+ (Rf/Dg) noninverting gain 11, -3dB BW 560kHz. |
| MAX690TC/D | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX130AEPL | MAXIMIC | 3 1/2 Digit A/D converter with bandgap reference |
| MAX4666ESE | MAXIMIC | 5om, quad, SPST, CMOS analog switch (two NC and two NO switches). |
