| Teil no | Hersteller | Application |
|---|
| MAX6378UR45-T | MaximIC | Ultra-low-power voltage detector, 4.5V |
| MAX6250BMJA | MaximIC | Low-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 8.0. |
| MAX6315US40D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.00V. Reset timeout period(min) 20ms. |
| MAX6318MHUK26BW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX4615ESD | MaximIC | Low-woltage, high-speed, quad, SPST, CMOS analog switch has four NC switches. |
| MAX4275AFEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 1.5, 1+ (Rf/Dg) noninverting gain 2.5, -3dB BW 1180kHz. |
| MAX4052CSE | MaximIC | Low-voltage, CMOS analog multiplexer |
| MAX6316MUK26CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX5253ACAP | MaximIC | +3V, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2. |
| MAX4598EAP | MaximIC | Low-voltage, CMOS analog IC, combination single-ended 8-to-1/differential 4-to-1 multiplexer. |
| MAX6319MHUK49B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 20ms |
| MAX189AMJA | MaximIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1/2. |
| MAX303EJE | MaximIC | Precision, dual, high-speed analog switch. |
| MAX5351AEPA | MaximIC | Low-power, 13-bit voltage-output DAC with serial interface. INL (LSB) +-1. +3.3V single-supply operation. |
| MAX6316LUK37DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| DG509ABK | MaximIC | Monolithic CMOS analog multiplexer. Differential 4-channel (2-of-8). |
| MAX6306UK42D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.095(min),4.305(max) Nominal timeout period 20ms. |
| MAX4066AESD | MaximIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX3296CHJ | MaximIC | 3.0V to 5.5V, 2.5Gbps LAN laser driver. |
| MAX6320PUK39CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX131ACQH | MaximIC | 3 1/2 Digit A/D converter with bandgap reference |
| MAX6711TEXS-T | MaximIC | Microprocessor reset circuit with manual reset input. Reset threshold 3.08V. Output type active-low push-pull reset. |
| MAX472CPA | MaximIC | Precision, high-side current-sense amplifier. Higher current-sense capability with external sense resistor. |
| MAX6321HPUK29BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6364HUT46-T | MaximIC | Low-power microprocessor supervisory circuit with auxiliary adjustable reset input. Reset threshold(typ) 4.63V. Active-high push-pull reset. |
| MAX6318LHUK25DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX5355EUA | MaximIC | 10-bit voltage-output DAC. +3.3V single supply operation. |
| MAX6321HPUK32AY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MX565ASD | MaximIC | High speed 12-bit monolithic D/A converter. High stability buried zener 10V reference. Error +-1/2LSB |
| MAX5170BEEE | MaximIC | Low-power, serial, 14-bit DAC with voltage output. Single-supply +5V operation. Full-scale output range +2.048V(Vref=+1.25V). INL(LSB) +-2. |
