| Teil no | Hersteller | Application |
|---|
| MAX4582CSE | MaximIC | Low-voltage, CMOS analog multiplexer (two 4-channel). |
| MAX186DEWP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX905C/D | MaximIC | Single, high-speed, positive edge-triggered, ECL-compatioble voltage comparator. |
| MAX541CCPA | MaximIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-4 |
| DG202C/D | MaximIC | Quad SPST CMOS analog switch. |
| MAX6330TUR-T | MaximIC | Precision shunt regulator with reset. Reset threshold 3.06V, shunt regulator voltage 3.3V |
| MAX4113ESA | MaximIC | Single, 270MHz -3dB bandwidth, low-power, current feedback amplifier. |
| DG202CK | MaximIC | Quad SPST CMOS analog switch. |
| MAX6321HPUK49AW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX261BENG | MaximIC | Microprocessor programmable universal active filter. Accuracy 2%. |
| MAX902ESD | MaximIC | High-speed, low-power voltage comparator |
| MAX6317HUK45BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX1110CCP | MaximIC | 2.7 V, low-power, multichannel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX6317HUK36CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6250AMJA | MaximIC | Low-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX709LESA | MaximIC | Power-supply monitor with reset. Reset threshold voltage 4.65V |
| MAX6318MHUK47BY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX164CMRG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| OP90GC/D | MaximIC | Precision low voltage micropower operational amplifier. |
| MAX3490ECPA | MaximIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 12Mbps. Supply voltage 3.0V to 3.6V |
| MAX6321HPUK41CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| ICL7622BCPD | MaximIC | Dual operational amplifier, 5mV |
| MAX6316LUK31CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX805TMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6322HPUK32C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms |
| MAX872ESA | MaximIC | 10microA, low-dropout, precision voltage reference. Output voltage 2.500V +-0.2%. Wide operating voltage range 2.7V to 20V. Line regulation over temp. 20microV/V. Load regulation over temp. 0.6mV/mA max |
| MAX4666CPE | MaximIC | 5om, quad, SPST, CMOS analog switch (two NC and two NO switches). |
| MAX815KCPA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. |
| MAX6317HUK37DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MX7224CQ | MaximIC | CMOS 8-bit DAC with output amplifier. Error +1 LSB. |
