| Teil no | Hersteller | Application |
|---|
| MAX6317HUK36DY-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1.12ms, typ watchdog timeout 1.6sec" |
| MAX6321HPUK42BW-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms" |
| IH5140MJE | MAXIMIC | "Low power fast CMOS analog switch. Single pole, single throw (SPST)." |
| MAX502BC/D | MAXIMIC | "Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4." |
| MAX6320PUK46DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6320PUK31AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX4259EEE | MAXIMIC | 250MHz -3bB bandwidth, 2-channel video multiplexer-amplifier. |
| MAX6318LHUK48DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX3385ECWN | MAXIMIC | +-15kV ESD-protected, 3.0V to 5.5V, low-power, up to 250kbps, true RS-232 transceiver. |
| MAX165ACWN | MAXIMIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1/2 LSB. Plug-in upgrade to the MX7575. |
| MAX520BCPE | MAXIMIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| MAX358CWE | MAXIMIC | Fault-protected analog 8 channel single-ended (1 of 8) multiplexer. |
| MAX6317HUK50CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6333UR22D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.2V, reset timeout(min) 1ms. |
| MAX6318LHUK37BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.700V min, reset timeout 20ms,typ watchdog timeout 102ms |
| MAX6313UK30D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.925(min) 3.075(max).Nominal timeout period 140ms. |
| MAX9690CSA | MAXIMIC | Ultra-fast ECL-output comparator |
| DG309DJ | MAXIMIC | Quad, SPST, NC analog switch |
| MAX6310UK37D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.608(min),3.793(max). Nominal timeout period 1ms. |
| MAX6320PUK46BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX509ACAP | MAXIMIC | Quad, serial 8-bit DAS with Rail-to-Rail output. TUE (LSB) +-1 |
| MAX4572CEI | MAXIMIC | Serially controlled, clickless audio/video switch. 2-wire, fast-mode, IIC-compatible. |
| MAX173C/D | MAXIMIC | Complete 5 microsec CMOS 10-bit A/D converter. |
| MAX6321HPUK50CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MX7536TD | MAXIMIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-1 LSB. |
| MAX6320PUK32BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX150BC/D | MAXIMIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1 LSB |
| MAX6320PUK35BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MX7543BQ | MAXIMIC | CMOS serial input 12 bit DAC. Error +1/2 LSB. |
| ICM7250IJE | MAXIMIC | Programmable timer/counter |
