| Teil no | Hersteller | Application |
|---|
| MAX6316LUK37DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MXD1013UA030 | MAXIMIC | 3-in-1 silicon delay line. Output delay 30ns. |
| MAX399C/D | MAXIMIC | Precision, dual 4-channel, low-voltage, CMOS analo0g multiplexer. |
| MAX6806XR26-T | MAXIMIC | Voltage detector. Reset output active-low, push-pull. Threshold reset 2.6V |
| MAX6316MUK28DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6504CMP005-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +5. |
| MAX4284EEE | MAXIMIC | Quad, open-loop, unity-gain stable amplifier |
| MAX6313UK39D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.803(min) 3.998(max).Nominal timeout period 1ms. |
| MAX324CUA | MAXIMIC | Precision, single-supply, SPST analog switch. |
| MAX6321HPUK36DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6318LHUK34AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX4322EUA | MAXIMIC | Single, low-cost, low-power, Rail-to-Rail I/O op amp. BW 5MHz |
| MAX6316MUK46CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,standard version (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6318MHUK37BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX712EPE | MAXIMIC | NiCd/NiMH battery fast-charge controller (by detecting zero voltage slope). |
| MAX235CPG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX130CQH | MAXIMIC | 3 1/2 Digit A/D converter with bandgap reference |
| MAX643ACSA | MAXIMIC | +15V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy |
| MAX6319MHUK34D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1120ms |
| MAX6326UR26-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.630V. Standard version. Order increment 2.5k |
| MAX453MJA | MAXIMIC | CMOS 50MHz video amplifier with an on-board multiplexer offering 2-channels |
| MAX8867C/D29 | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator. Preset output voltage 2.84V |
| MAX5352BCPA | MAXIMIC | Low-power, 12-bit voltage-output DAC with serial interface. INL (LSB) +-1. +5V single-supply operation. |
| MAX6310UK44D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.270(min),4.490(max). Nominal timeout period 1ms. |
| MAX6316MUK43AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX406AESA | MAXIMIC | 1.2microA max, single, single-supply op amp. |
| MAX192AEPP | MAXIMIC | Low-power, 8-channel, serial 10-bit ADC. Error(LSB) +-1/2. |
| MAX6316MUK44CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 140ms, typ watchdog timeout 102 |
| MAX6301CUA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-low reset, open-drain reset output). |
| MAX6317HUK45AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 102ms |
