| Teil no | Hersteller | Application |
|---|
| MXL1062MJB | MAXIMIC | 5th order, zero DC error, lowpass filter. |
| MAX362ESE | MAXIMIC | Precision, quad, SPST analog switch. |
| MAX6307UK42D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.095(min),4.305(max).Nominal timeout period 1120ms. |
| ICL7136CQH | MAXIMIC | Low power, 3-1/2 digit A/D converter |
| MAX6320PUK37CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6320PUK28AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX518BCSA | MAXIMIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1.5. |
| DG406CWI | MAXIMIC | Improved, 16-channel CMOS analog multiplexer |
| MAX6321HPUK30AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX5353ACPA | MAXIMIC | Low-power, 12-bit voltage-output DAC with serial interface. INL (LSB) +-1. +3.3V single-supply operation. |
| MAX6319MHUK45B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms |
| MAX525BEPP | MAXIMIC | Low-power, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MXD1000PD25 | MAXIMIC | 5-tap silicon delay line |
| MAX501BENG | MAXIMIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4. |
| MAX6318MHUK38AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX1292BCEG | MAXIMIC | 400ksps, +5V, 4-channel, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1,-1 |
| MAX1246BMJE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1,-1 |
| MAX6313UK44D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.270(min) 4.490(max).Nominal timeout period 1ms. |
| MAX807NCWE | MAXIMIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.575V |
| MAX174BCPI | MAXIMIC | Industry standard complete 12-bit A/D converter. 8 microsec max conversion time. Linearity (LSBs) 1/2. TEMPCO (ppm/C) 27. |
| MAX4075BFEUA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 25V/V, noninverting gain 26V/V, -3dB BW 106kHZ. |
| MAX1655EEE | MAXIMIC | High-efficiency, PWM, step-down DC-DC controller in 16-pin QSOP |
| MAX6316LUK32DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX494ESD | MAXIMIC | Quad, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX6312UK29D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.857(min) 3.000(max). Nominal timeout period 1120ms. |
| MAX186CCWP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6318MHUK47AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX805TCSA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6306UK49D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.778(min),5.023(max) Nominal timeout period 140ms. |
| MAX6318LHUK33BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 20ms, typ watchdog timeout 25.6sec |
