| Teil no | Hersteller | Application |
|---|
| MAX6316LUK30CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX8214AMJE | MAXIMIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Active pull-up outputs. |
| MAX4053CEE | MAXIMIC | Low-voltage, CMOS analog switch |
| MAX6320PUK26BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX709RCPA | MAXIMIC | Power-supply monitor with reset. Reset threshold voltage 2.63V |
| MAX1249BMJE | MAXIMIC | +2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1,-1 |
| MAX6317HUK43BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX809REXR-T10 | MAXIMIC | Microprocessor reset circuit. Reset threshold 2.62V. Push-pull active-high reset. 10k increments. |
| MAX4501ESA | MAXIMIC | Low-voltage, SPST, CMOS analog switch. |
| MAX4580CPE | MAXIMIC | 1.25om, dual SPST, CMOS analog switch. Two NC (normally closed) switches. |
| MAX2411AEEI | MAXIMIC | Low-cost RF up/downconverter with LNA and PA driver. |
| MAX6321HPUK37AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX3762EEP | MAXIMIC | Low-power, 622Mbps limiting amplifier with chatter-free power detect for LANs. |
| MAX6317HUK47AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6309UK50D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max) Nominal timeout period 140ms. |
| MAX5102AEUE | MAXIMIC | +2.7V to 5.5V, low-power, dual, parallel 8-bit DAC with Rail-to-Rail voltage output. INL (LSB) +-1 |
| MXL1014MJ | MAXIMIC | Quad precision op amp. |
| MAX4241ESA | MAXIMIC | Single, ultra-low-voltage operation guaranteed down to +1.8V, typical operation to +1.5V, 10microA supply current, Beyond-the-Rail op amp with shutdown. |
| MAX6320PUK33CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX764CPA | MAXIMIC | -5V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX6318MHUK32BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| ICL7653CPA | MAXIMIC | Chopper-stabilized amplifier |
| MAX984EPE | MAXIMIC | Ultra-low-power, open-drain, quad comparator. Internal precision reference 2%. Internal hysteresis no. |
| MAX754EPE | MAXIMIC | CCFL backlight and LCD contrast controller. Positive LCD contrast. |
| MAX6320PUK48AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX696EJE | MAXIMIC | Microprocessor supervisory circuit. Battery backup power switching. |
| MAX159ACPA | MAXIMIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 0.5 |
| MAX150AEWP | MAXIMIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1/2 LSB |
| MAX532BEPE | MAXIMIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1 |
| MAX4593ESE | MAXIMIC | High-speed, single-supply 12V, quad, SPST analog switches (two NO and two NC switches). |
