| Teil no | Hersteller | Application |
|---|
| MAX613EPD | MAXIMIC | Dual-slot PCMCIA analog power controller. |
| MAX6316LUK30CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX4275AFESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 1.5, 1+ (Rf/Dg) noninverting gain 2.5, -3dB BW 1180kHz. |
| MAX4614ESD | MAXIMIC | Low-woltage, high-speed, quad, SPST, CMOS analog switch has four NO switches. |
| DG506AAK | MAXIMIC | Monolithic CMOS single 16 channel (1 of 16) analog multiplexer. |
| MAX6318MHUK48DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6312UK49D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.778(min) 5.023(max). Nominal timeout period 140ms. |
| MAX6306UK32D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.120(min),3.280(max) Nominal timeout period 140ms. |
| MAX6318MHUK32DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX768EEE | MAXIMIC | Low-noise, dual-output, regulated charge pump for GaAsFET, LCD, and VCO supplies |
| MX7824KCAG | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
| MAX4534ESD | MAXIMIC | Fault-protected, high-voltage, single 4-to-1 multiplexer operated with +-4.5V to +-20V dual supply or a +9V to +39V single supply. |
| MAX792LCPE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V |
| MAX4539EPP | MAXIMIC | Low-voltage, single 8-to-1 calibration multiolexer. |
| MAX6320PUK43DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX1706C/D | MAXIMIC | 1-cell to 3-cell, high-current, low-noise, step-up DC-DC converter with linerar regulator. |
| MAX6316LUK46CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX1200ACMH | MAXIMIC | +5V single-supply, 1Msps, 16-bit self-calibrating ADC |
| MAX801NCSA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog. |
| MAX270CWP | MAXIMIC | Digitally-programmed, dual 2nd-order continuous lowpass filter. |
| MAX468CWE | MAXIMIC | Two-channel, quad video buffer. Voltage gain 1V/V. |
| DG305CJ | MAXIMIC | CMOS dual and quad analog switch. |
| MAX651C/D | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX4589CAP | MAXIMIC | Low-voltage, high-isolation, dual 2-channel RF and video multiplexer. |
| MAX6318LHUK33AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1ms, typ watchdog timeout 102ms |
| MAX747CSD | MAXIMIC | High-efficiency, PWM, step-down P-channel DC-DC controller |
| ICL7662CBA | MAXIMIC | CMOS voltage converter |
| MAX748ACWE | MAXIMIC | Step-down, current-mode PWM DC-DC controller. Input voltage range 3.3V to 16V |
| MAX6353MSUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset 5V. |
| MAX501BCNG | MAXIMIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4. |
