| Teil no | Hersteller | Application |
|---|
| MAX495MJA | MAXIMIC | Single, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX6316MUK39DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX809MEUR-T | MAXIMIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 2.5k increments. |
| MAX1489ECSD | MAXIMIC | +,-15kV ESD-protected, quad, low-power RS-232 line driver |
| MAX6306UK35D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.413(min),3.588(max) Nominal timeout period 1ms. |
| MAX695C/D | MAXIMIC | Microprocessor supervisory circuit. |
| MAX6379XR38-T | MAXIMIC | Ultra-low-power voltage detector, 3.8V |
| DG419CJ | MAXIMIC | Improved, SPDT (one NO and one NC) analog switch |
| MAX6348UR35-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.500V. Order increment 10k |
| MAX4530EPP | MAXIMIC | Low-voltage, CMOS analog ICs configured as an 8-channel multiplexer. |
| MAX6347UR44-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.380V. Standard version. Order increment 2.5k |
| MAX814TCPA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX6320PUK32BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX6320PUK44DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX5191BEEI | MAXIMIC | Dual,8-bit, 40MHz, current/voltage, alternate-phase output DAC. |
| MAX1044CSA | MAXIMIC | Switched-capacitor voltage converter |
| MAX544AEPA | MAXIMIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1/2 |
| MX7531JD | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 0.2% |
| MAX3226EEAE | MAXIMIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX1652EEE | MAXIMIC | High-efficiency, PWM, step-down DC-DC controller in 16-pin QSOP |
| MAX527CCNG | MAXIMIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1/2. Fast output settling 5micros. +-5V supply operation. |
| ICL8069DESA | MAXIMIC | Low-voltage reference, 100 ppm/C - max temp. coefficient. |
| MAX6317HUK38AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX4555C/D | MAXIMIC | Force-sense switches (four indepedent SPST NC switches, two force switches, and two sense switches). |
| MAX6314US47D4-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.70V. Reset timeout period(min) 1120ms. |
| MAX4611CPD | MAXIMIC | Low-voltage, quad, SPST, CMOS analog switches (four NC switches). |
| MAX508ACWP | MAXIMIC | Voltage-output, 12-bit DAC with internal reference. 8+4 data-bus widths. Error +-1/2. |
| MXD1013C/D050 | MAXIMIC | 3-in-1 silicon delay line. Output delay 50ns. |
| MAX6316LUK47BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6320PUK27DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
