| Teil no | Hersteller | Application |
|---|
| MX7547JP | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-6 LSB. |
| MAX297EPA | MAXIMIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 50kHz |
| DG301BWE | MAXIMIC | Dual, TTL compatible CMOS analog switch. |
| MAX6320PUK48BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX5480BEEE | MAXIMIC | 8-bit parallel DAC. Error(LSB) +-1. |
| MAX6316LUK45DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6322HPUK31A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms |
| MAX985EUK-T | MAXIMIC | Single, low-power, Rail-to-Rail I/O comparator. Push/pull output stage sinks and sources. |
| MXD1005UA100 | MAXIMIC | 5-tap silicon delay line |
| MAX6313UK41D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.998(min) 4.203(max).Nominal timeout period 1120ms. |
| OP27FJ | MAXIMIC | Low-noise precision operational amplifier. 8MHz gain-bandwidth product. 2.8V/micros slew rate |
| MAX3243EWI | MAXIMIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MX7248J/D | MAXIMIC | Complete, 12-bit voltage-output DAC. |
| MAX6318MHUK40DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6321HPUK36CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6320PUK37CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX1403EAI | MAXIMIC | +3V, 18-bit, low-power, multichannel, oversampling (sigma-delta) ADC |
| MAX146ACPP | MAXIMIC | +2.7 V, low-power, 8-channel, serial 12-bit ADC. INL(LSB) +-1/2. |
| MAX6316MUK29BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6318MHUK25BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6318LHUK31DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX3223ECAP | MAXIMIC | +-15kV ESD-protected, 1microA, 3.0 to 5.5V, 250kbps, RS-232 transceiver with AutoShutdown. |
| MAX1246AEEE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX6318LHUK33AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX4120EEE | MAXIMIC | Quad, 300MHz -3dB bandwidth, low-power, current feedback amplifier. |
| MX7828LN | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1/2 |
| MAX261ACWG | MAXIMIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MAX6321HPUK39AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6160ESA | MAXIMIC | Low-cost, low-dropout, 3-terminal voltage reference. Preset output voltage adjustable(1.23V to 12.40V). |
| MAX3220AEAP | MAXIMIC | 3V to 5.5V, up to 250kbps true RS-232 transceiver with 4microA autoshutdown plus and power-on reset. Reset threshold 4.25V. |
