| Teil no | Hersteller | Application |
|---|
| MAX539ACPA | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1/2. 140microA supply current. Flexible output ranges 0V to Vdd. |
| MAX6318MHUK48DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX708SCPA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.93V. Active-low and active-high reset output signal. |
| MAX8211ESA | MAXIMIC | Microprocessor voltage monitor with programmable voltage detection. Define output current limit. |
| MX7828KCWI | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
| MAX8874REUK-T | MAXIMIC | Low-dropout, 120mA linear regulator with auto-discharge function. Preset output voltage 2.80V. |
| MAX6316LUK48CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX225EWI | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX3665EUA | MAXIMIC | 622Mbps, ultra-low-power, 3.3V transimpedance preamplifier for SDH/SONET. |
| DG403AZ | MAXIMIC | Improved, dual, SPDT, two NO and two NC switches, high-speed analog switch. |
| MAX801MEPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. |
| MAX6347UR40-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.000V. Order increment 10k |
| MAX4521CPE | MAXIMIC | Quad, low-voltage, SPST analog switch. |
| MAX810TEUR-T10 | MAXIMIC | Microprocessor reset circuit. Reset threshold 3.08V. Push-pull active-high reset. 10k increments. |
| MAX6319LHUK41B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms |
| MAX6320PUK34CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX951C/D | MAXIMIC | Ultra low-power, single-supply Op Amp + comparator + reference. Internal 1.2V+-2% bandgap reference. Op Amp gain stability 1V/V. Supply current 7microA. |
| MAX465CWG | MAXIMIC | Two-channel, triple RGB switch and buffer. Voltage gain 2V/V. |
| MAX5150BEEE | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1. |
| MAX6318MHUK30CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX297MJA | MAXIMIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 50kHz |
| MAX234CPE | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX1125AIBH | MAXIMIC | 8-bit,300 Msps flash ADC |
| MAX6320PUK39AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX913C/D | MAXIMIC | Dual, ultra-fast(10ns), low-power, precision TTL comparator. |
| MAX3232ECAE | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6319LHUK44D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1120ms |
| MX7541BQ | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1/2 LSB. |
| MAX6316LUK47AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6322HPUK44D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1120ms |
