| Teil no | Hersteller | Application |
|---|
| MAX4521CPE | MAXIMIC | Quad, low-voltage, SPST analog switch. |
| MAX810TEUR-T10 | MAXIMIC | Microprocessor reset circuit. Reset threshold 3.08V. Push-pull active-high reset. 10k increments. |
| MAX6320PUK34CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6318MHUK30CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX1125AIBH | MAXIMIC | 8-bit,300 Msps flash ADC |
| MAX6320PUK39AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX913C/D | MAXIMIC | Dual, ultra-fast(10ns), low-power, precision TTL comparator. |
| MAX3232ECAE | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6319LHUK44D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1120ms |
| MX7541BQ | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1/2 LSB. |
| MAX6316LUK47AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6322HPUK44D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1120ms |
| MAX234CPE | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX3222EEWN | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| IH5042CJE | MAXIMIC | General-purpose CMOS analog switch. Single pole, double throw (SPDT) |
| MAX6307UK46D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.514(min),4.746(max).Nominal timeout period 1ms. |
| MAX422CPA | MAXIMIC | +-15V chopper stabilized operational amplifier. |
| MAX6319LHUK41B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms |
| MX584TQ | MAXIMIC | Pin programmable precision voltage reference. Error +-10mV. |
| MXD1013C/D035 | MAXIMIC | 3-in-1 silicon delay line. Output delay 35ns. |
| MAX6316LUK27DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX6318MHUK41CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX3185CAP | MAXIMIC | +-15kV ESD-protected, EMC-compliant, 230kbps RS-232 serial port for motherboards/desktop PSs. |
| MAX4132EUA | MAXIMIC | Dual, wide-bandwidth, low-power, +2.7V to +6.5V single-supply operation, Rail-to-Rail I/O op amp. |
| MAX327C/D | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX178BENG | MAXIMIC | Calibrated 12-bit ADC with T/H and reference. |
| MX7536KCWI | MAXIMIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-1 LSB. |
| ICM7218CIQI | MAXIMIC | 8 digit LED display driver |
| MAX4274CAESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 100, 1+ (Rf/Dg) noninverting gain 101, -3dB BW 230kHz. |
| MAX4204EUA | MAXIMIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
