| Teil no | Hersteller | Application |
|---|
| MAX4541CUA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX3471CUA | MAXIMIC | 1.6microA, RS-485/RS-422, half-duplex, differential transceiver for battety-powered systems |
| MAX4547CPE | MAXIMIC | Single,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX6318MHUK36DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX4538CSE | MAXIMIC | Quad, low-voltage, SPST analog switches with enable. 2 NO and 2 NC. |
| MAX1771MJA | MAXIMIC | 12V or adjustable, high efficiency, low current, step-up DC-DC controller. |
| MAX4611EPD | MAXIMIC | Low-voltage, quad, SPST, CMOS analog switches (four NC switches). |
| MX636JD | MAXIMIC | 100mV. Auxiliary dB output 50dB range. Low power 0.8mA(typ). |
| MAX691CPE | MAXIMIC | Microprocessor supervisory circuit. |
| MAX6316LUK29BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6318LHUK26BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.630V min, reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX480MJA | MAXIMIC | High-precision, low-voltage, micropower op amp. |
| MAX772C/D | MAXIMIC | 15V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX6310UK26D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.564(min),2.696(max). Nominal timeout period 1ms. |
| MXL1116CS8 | MAXIMIC | Ultra-fast precision TTL comparator. 12ns typ high-speed. |
| MAX6313UK25D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.438(min) 2.563(max).Nominal timeout period 1120ms. |
| MAX120C/D | MAXIMIC | 500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +1 |
| MAX630CPA | MAXIMIC | CMOS micropower step-up switching regulator |
| MAX6320PUK37CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX1091AEEI | MAXIMIC | 250ksps, +3V, 8-channel single-ended/4-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 0.5 |
| MAX128BENG | MAXIMIC | Multirange, +5V, 12-bit DAS with 2-wire serial interface. INL(LSB) +1,-1 |
| DG405AK | MAXIMIC | Improved, dual, DPST, NO, high-speed analog switch. |
| MAX5132BEEE | MAXIMIC | +5V, 13-bit, serial, force/sense DAC. Built-in 10ppm/C(max) precision bandgap reference +2.5V. INL (LSB) +-1. |
| MAX6328UR28-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.800V. Order increment 10k |
| MAX1425EAI | MAXIMIC | 10-bit, 20Msps ADC |
| MXL1062CS | MAXIMIC | 5th order, zero DC error, lowpass filter. |
| MAX6318LHUK50AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX1271ACAI | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX6318MHUK30AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX792SEPE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.91V |
