| Teil no | Hersteller | Application |
|---|
| MAX6502CMP045-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +45. |
| MAX6316LUK35BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX4546ESE | MAXIMIC | Dual,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX9053BEUB | MAXIMIC | Micropower, single-supply, dual comparator + precision reference IC. |
| MAX6320PUK32CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX327EEE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX6364HUT31-T | MAXIMIC | Low-power microprocessor supervisory circuit with auxiliary adjustable reset input. Reset threshold(typ) 3.06V. Active-high push-pull reset. |
| MAX6319MHUK49C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 140ms |
| MAX241CAI | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX815KCSA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. |
| MAX692MJA | MAXIMIC | Microprocessor supervisory circuit. |
| IH5141CTW | MAXIMIC | Low power fast CMOS analog switch. Dual, single pole, single throw (Dual SPST). |
| DG384CJ | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX260AMRG | MAXIMIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MX7537LCWG | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-1 LSB. |
| MAX6312UK41D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.998(min) 4.203(max). Nominal timeout period 1120ms. |
| MAX6316LUK38BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX1402EAI | MAXIMIC | +5V, 18-bit, low-power, multichannel, oversampling (sigma-delta) ADC |
| MAX6318LHUK32DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.200V min, reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6319MHUK34C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms |
| MAX1486CUB | MAXIMIC | Software-selectable, half-/full-duplex, slew-rate-limite 12 Mbps, RS-485/RS-422 transceiver. |
| IH5051CPE | MAXIMIC | CMOS analog switch. |
| MAX6316MUK47DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX649ESA | MAXIMIC | 5V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX944CPD | MAXIMIC | Quad, high-speed, low-power, 3V or 5V single-supply, Rail-to-Rail comparator |
| MAX236C/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6314US50D4-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 5.00V. Reset timeout period(min) 1120ms. |
| MAX6315US42D3-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.20V. Reset timeout period(min) 140ms. |
| MAX757EPA | MAXIMIC | 3.3V to 5V adjustable-output, step-up DC-DC converter. |
| MAX6806UR46-T | MAXIMIC | Voltage detector. Reset output active-low, push-pull. Threshold reset 4.6V |
