| Teil no | Hersteller | Application |
|---|
| MAX6320PUK37BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX4066AMJD | MAXIMIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX1641EEE | MAXIMIC | Adjustable-output, switch-mode current souces with synchronous rectifier. Current-sense accuracy 2% |
| MAX535BMJA | MAXIMIC | Low-power, 13-bit voltage-output DAC with serial interface. INL (LSB) +-2. +5V single-supply operation. |
| MAX608C/D | MAXIMIC | 5V or adjustable, low-voltage, step-up DC-DC controller. |
| MAX4226ESDB | MAXIMIC | Single, 1GHz -3dB bandwidth, min gain +1, low-power, current-feetback amplifier with shutdown. |
| MAX6320PUK42BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX214CPI | MAXIMIC | Programmable DTE/DCE, +5V RS-232 transceiver. |
| MXD1000C/D60 | MAXIMIC | 5-tap silicon delay line |
| DG202BK | MAXIMIC | Quad SPST CMOS analog switch. |
| MAX1489EESD | MAXIMIC | +,-15kV ESD-protected, quad, low-power RS-232 line driver |
| MAX4535EUD | MAXIMIC | Fault-protected, high-voltage, dual 2-to-1 multiplexer operated with +-4.5V to +-20V dual supply or a +9V to +39V single supply. |
| MAX306EWI | MAXIMIC | Precision, 16-channel, high-performance, CMOS analog multiplexer |
| MAX4533MJP | MAXIMIC | Quad, Rail-to-Rail, fault-protected, SPDT analog switch. |
| MAX359C/D | MAXIMIC | Fault-protected analog 4 channel differential (2 of 8) multiplexer. |
| MAX6318LHUK46CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,standard version(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 140ms,typ watchdog timeout 1.6sec |
| MAX539BESA | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. 140microA supply current. Flexible output ranges 0V to Vdd. |
| MAX976ESA | MAXIMIC | Dual, single-supply, high-speed, low-power comparator. |
| MAX182BEWI | MAXIMIC | Calibrated 4-channel 12-bit ADC with T/H and reference. |
| MAX140CQH | MAXIMIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MAX638AMJA | MAXIMIC | Fixed +5V output or adjuistable output with 2 resistors, CMOS step-down switching regulator. |
| MAX186BCCP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX157BEPA | MAXIMIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 1 |
| MAX111BEAP | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX6377XR27-T | MAXIMIC | Ultra-low-power voltage detector, 2.7V |
| MAX4278EPA | MAXIMIC | 310MHz -3dB bandwidth, gain of +2, closed-loop buffer. |
| MAX803MEXR-T10 | MAXIMIC | Microprocessor reset circuit Reset threshold 4.38V. Open-drain active-low reset. 10k increments. |
| MAX6318LHUK39AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.900V min, reset timeout 1ms,typ watchdog timeout 1.6sec |
| MAX6318MHUK28BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6316LUK30AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
