| Teil no | Hersteller | Application |
|---|
| MAX3221EUE | MAXIMIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX6314US33D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 1ms. |
| MAX6317HUK38DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6318MHUK32AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX6314US47D3-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.70V. Reset timeout period(min) 140ms. |
| MAX4074BEESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 24V/V, noninverting gain 25V/V, -3dB BW 120kHZ. |
| MX7578BQ | MAXIMIC | Calibrated 12-bit A/D converter |
| MAX690ACPA | MAXIMIC | Microprocessor supervisory circuit. 4.65V precision supply-voltage monitor |
| MAX6321HPUK32BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX818LEPA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.65V, active-low reset, backup-battery switchover, watchdog input, battery freshness seal, chip-enable gating. |
| MAX4617CUE | MAXIMIC | Low-woltage, high-speed, CMOS analog IC configured as 8-channel multiplexer |
| MAX6316LUK38BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX974CSE | MAXIMIC | Ultra-low-power, open-drain, quad comparator. Internal precision reference 1%. Internal hysteresis no. |
| ICL7616ACSA | MAXIMIC | Single operational amplifier, 2mV |
| MAX814LCPA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.65V (max) 4.75V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX6351SYUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 2.93V (Vcc5) and 2.19V (Vcc3). Active-low push-pull reset output 5V and 3V. Standard version. |
| MAX186CMJP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6321HPUK25AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX6711MEXS-T | MAXIMIC | Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset. |
| MAX6320PUK36BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| DG301ABWE | MAXIMIC | Quad, TTL compatible CMOS analog switch. |
| MAX773CSD | MAXIMIC | 5V, 12V,15V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| OP07EZ | MAXIMIC | Low offset voltage operational amplifier. |
| MAX3081CSA | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX6320PUK50AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX791ESE | MAXIMIC | Microprocessor supervisory circuit |
| MAX6307UK40D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.900(min),4.100(max).Nominal timeout period 1ms. |
| MAX736MJD | MAXIMIC | -12V, inverting carrent-mode PWM regulator. |
| MAX4051ESE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
| MAX333CPP | MAXIMIC | Quad SPDT CMOS analog switch. |
