| Teil no | Hersteller | Application |
|---|
| MAX4189ESD | MAXIMIC | =1V/V. |
| MAX6361PUT31-T | MAXIMIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 3.06V. Active-low open-drain reset. |
| MAX6318MHUK37DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX687CPA | MAXIMIC | High-accuracy, low-dropout linear regulator |
| MAX9052BEUA | MAXIMIC | Micropower, single-supply, dual comparator + precision reference IC. |
| MAX211C/D | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX6321HPUK48CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| ICL7663BIJA | MAXIMIC | Programmable positive voltage regulator |
| MAX6317HUK42AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6321HPUK41DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX859ESA | MAXIMIC | Adjustable-output, step-up DC-DC converter. Adjustable version 0.8V to 6.0V input voltage , output voltage 2.7V to6.0V range. |
| MAX324MJA | MAXIMIC | Precision, single-supply, SPST analog switch. |
| MAX6320PUK45AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MX7503JN | MAXIMIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX3223CUP | MAXIMIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX6316MUK37BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX730AEPA | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept input between 5.5V and 11V and deliver 450mA for inputs above 6V. |
| MAX418ESD | MAXIMIC | 1.2microA max, quad, single-supply op amp. |
| MAX800LESE | MAXIMIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.65V. Guaranteed power-fail accuracy to +-2% |
| MAX6309UK50D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max) Nominal timeout period 1ms. |
| MAX167AMRG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1/2 LSB. |
| MAX6317HUK35DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX489EESD | MAXIMIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Full-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 32. |
| MAX208CWG | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX3760E/D | MAXIMIC | 622Mbps, low-noise transimpedance preamplifier for LAN and WAN optical receivers. |
| MAX3483ECSA | MAXIMIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0.25Mbps. Supply voltage 3.0V to 3.6V |
| MAX811LEUS-T | MAXIMIC | Microprocessor voltage monitor with manual reset input. Reset threshold voltage 4.63V |
| MAX4556CPE | MAXIMIC | Force-sense switches (three indepedent SPDT switches, of which one is a force switch and two sense switches). |
| MAX766MJA | MAXIMIC | -15V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| DG529C/D | MAXIMIC | 8-channel latchable multiplexer |
