| Teil no | Hersteller | Application |
|---|
| MAX756ESA | MAXIMIC | 3.3V to 5V adjustable-output, step-up DC-DC converter. |
| MAX110AEAP | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX768C/D | MAXIMIC | Low-noise, dual-output, regulated charge pump for GaAsFET, LCD, and VCO supplies |
| MAX738AEPA | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. |
| MAX634C/D | MAXIMIC | CMOS micropower inverting switching regulator |
| MAX6309UK25D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.438(min),2.563(max) Nominal timeout period 1ms. |
| MAX674EJA | MAXIMIC | +10V precision voltage reference. Temp. coefficient ppm/degC 15. Initial error 15mV |
| MAX6321HPUK29CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| ICL7650CPD | MAXIMIC | Chopper-stabilized amplifier |
| MX536AJN | MAXIMIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX6317HUK26CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MX7534JN | MAXIMIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX819MESA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.40V, active-low reset, backup-battery switchover, power-fail comparator, battery freshness seal, manual reset input. |
| ICL7650MJD | MAXIMIC | Chopper-stabilized amplifier |
| MAX505AEWG | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-1 LSB. |
| MAX527DEWG | MAXIMIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1. Fast output settling 5micros. +-5V supply operation. |
| MAX6319LHUK45B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms |
| MAX3268CUB | MAXIMIC | 3.0V to 5.5V, 1.25Gbps limiting amplifier. |
| MAX6316MUK45AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6312UK32D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.120(min) 3.280(max). Nominal timeout period 140ms. |
| MAX6353MRUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset 5V. |
| MAX6313UK38D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.705(min) 3.895(max).Nominal timeout period 1120ms. |
| MAX1241CCSA | MAXIMIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1 |
| MAX6321HPUK37CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX776CPA | MAXIMIC | -15V or adjustable, high-efficiency, low IQ inverting DC-DC controller |
| MAX6306UK45D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.388(min),4.613(max) Nominal timeout period 20ms. |
| MX7820BQ | MAXIMIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1 LSB |
| MAX5172AEEE | MAXIMIC | Low-power, serial, 14-bit DAC with voltage output. Single-supply +3V operation. Full-scale output range +4.096V(Vref=+2.5V). INL(LSB) +-2. |
| MAX6320PUK28BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX879ESA | MAXIMIC | Step-up/step-down DC-DC converters |
