| Teil no | Hersteller | Application |
|---|
| MAX6316MUK26CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6025AEUR-T | MAXIMIC | Precision, low-power, low-dropout, SOT23-3 voltage reference. Output voltage 2.500V, input voltage (Vout + 200mV)V to 12.6V. |
| MAX1241BCPA | MAXIMIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1 |
| MAX824REUK | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 2.63V. Active-low reset. Active-high reset. Watchdog input. |
| MAX6334UR16D2-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 20ms. |
| MAX359EJE | MAXIMIC | Fault-protected analog 4 channel differential (2 of 8) multiplexer. |
| MAX6310UK25D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.438(min),2.563(max). Nominal timeout period 140ms. |
| MAX6314US42D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.20V. Reset timeout period(min) 1ms. |
| MAX544BCPA | MAXIMIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1 |
| IH5352C/D | MAXIMIC | Quad RF and video switch |
| MXD1013UA075 | MAXIMIC | 3-in-1 silicon delay line. Output delay 75ns. |
| MAX4223EUT-T | MAXIMIC | Single, 1GHz -3dB bandwidth, min gain +1, low-power, current-feetback amplifier with shutdown. |
| MAX640CPA | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX6318LHUK45CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.500V min, reset timeout 140ms,typ watchdog timeout 102ms |
| MX7541ABD | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1/2 LSB. |
| MAX419CPD | MAXIMIC | 1.2microA max, quad, single-supply op amp. |
| MAX6318LHUK35CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.500V min, reset timeout 140ms,typ watchdog timeout 6.3ms |
| MAX797C/D | MAXIMIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Logic-controlled low-noise mode. |
| MAX189AEWE | MAXIMIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1/2. |
| MAX974C/D | MAXIMIC | Ultra-low-power, open-drain, quad comparator. Internal precision reference 1%. Internal hysteresis no. |
| MAX6318LHUK30AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.000V min, reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6316MUK37AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX1243BESA | MAXIMIC | +2.7V to +5.25V, low-power, 10-bit serial ADCs in SO-8. INL (LSB) +1 |
| MAX232C/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX944ESD | MAXIMIC | Quad, high-speed, low-power, 3V or 5V single-supply, Rail-to-Rail comparator |
| MAX4545EAP | MAXIMIC | Quad,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX4274BLESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 60, 1+ (Rf/Dg) noninverting gain 61, -3dB BW 310kHz. |
| MAX6321HPUK27DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6316MUK42BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX1681ESA | MAXIMIC | 125 mA, frequency-selectable, switched-capacitor voltage converter. |
