| Teil no | Hersteller | Application |
|---|
| MAX238ENG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6318LHUK50BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6348XR37-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.700V. Order increment 10k |
| MAX5160MEUA | MAXIMIC | Low-power, digital potentiometer. R(kom) 100. |
| DG381CWE | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX6321HPUK37CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6358LSUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low open-drain reset. Watchdog timer. Standard version. |
| MX7581CD | MAXIMIC | CMOS 8-bit 8-channel data acquisition system. Error 1/2 LSB. |
| MX7845SQ | MAXIMIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX6317HUK32DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6021AEUR-T | MAXIMIC | Precision, low-power, low-dropout, SOT23-3 voltage reference. Output voltage 2.048V, input voltage 2.5V to 12.6V. |
| MAX412BCPA | MAXIMIC | Dual, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX326CPE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX541CCSA | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-4 |
| MAX6316LUK38AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX6302CUA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-high reset, open-drain reset output). |
| MAX117C/D | MAXIMIC | 3 V, 400 ksps, 8-channel, 8-bit ADC |
| MAX2661EUT-T | MAXIMIC | 400MHz to 2.5GHz upconverter mixer. |
| MAX6316MUK30DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX776EPA | MAXIMIC | -15V or adjustable, high-efficiency, low IQ inverting DC-DC controller |
| MAX4201EUK-T | MAXIMIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
| MAX748AMJA | MAXIMIC | Step-down, current-mode PWM DC-DC controller. Input voltage range 3.3V to 16V |
| MAX334CPE | MAXIMIC | High speed quad SPST analog switch |
| MAX394CPP | MAXIMIC | Precision, quad, SPST analog switch |
| MAX6316LUK37CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX336MJI | MAXIMIC | 16-channel, low-leakage, CMOS analog multiplexer. |
| MXD1000SE500 | MAXIMIC | 5-tap silicon delay line |
| MAX1243BEPA | MAXIMIC | +2.7V to +5.25V, low-power, 10-bit serial ADCs in SO-8. INL (LSB) +1 |
| MAX398CPE | MAXIMIC | Precision, 8-channel, low-voltage, CMOS analo0g multiplexer. |
| MAX323ESA | MAXIMIC | Precision, single-supply, SPST analog switch. |
