| Teil no | Hersteller | Application |
|---|
| MAX4175BDEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 20, 1+ (Rf/Dg) noninverting gain 21, -3dB BW 300kHz. |
| MAX4174AGEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 2, 1+ (Rf/Dg) noninverting gain 3, -3dB BW 970kHz. |
| MAX4514MJA | MAXIMIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally open (NO), +2V to +12V single-supply operation. |
| MAX1243BCSA | MAXIMIC | +2.7V to +5.25V, low-power, 10-bit serial ADCs in SO-8. INL (LSB) +1 |
| ICL7616ACTV | MAXIMIC | Single operational amplifier, 2mV |
| MAX534ACEE | MAXIMIC | 5V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-1 |
| MAX6316LUK46DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX318CJA | MAXIMIC | Precision, CMOS analog switch |
| MAX502BCWG | MAXIMIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4. |
| MAX774C/D | MAXIMIC | -5V or adjustable, high-efficiency, low IQ inverting DC-DC controller |
| MX7545JCWP | MAXIMIC | CMOS 12-bit buffered multiplying DAC. Error +-2 LSB. |
| MAX6333UR16D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 1ms. |
| MAX350CWN | MAXIMIC | Serially controlled, low-voltage, dual 4-channel multiplexer |
| MAX4052EPE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
| MAX1270ACAI | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX4053ACSE | MAXIMIC | Low-voltage, CMOS analog switch |
| MAX772CSA | MAXIMIC | 15V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX313CUE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX174BEPI | MAXIMIC | Industry standard complete 12-bit A/D converter. 8 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 38. |
| MAX6322HPUK42C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 140ms |
| MAX473EPA | MAXIMIC | Single, 10MHz single-supply op amp. |
| MAX6316MUK28BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX4275ABESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 0.25, 1+ (Rf/Dg) noninverting gain 1.25, -3dB BW 1700kHz. |
| MAX452CSA | MAXIMIC | CMOS unity-gain stable, 50MHz video amplifier. |
| MAX3243EAI | MAXIMIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX701EPA | MAXIMIC | Power-supply monitor with reset. |
| MAX908CPD | MAXIMIC | Dual, high-speed, ultra low-power, single 4.4V to 5.5V supply operation TTL comparator. |
| MAX9001ESD | MAXIMIC | Low-power, high-speed, single-supply op amp + comparator + reference IC. Internal precision reference 1.23V. Op-Amp gain stability 1V/V. Op-Amp gain bandwidth 1.25MHz. Shutdown mode. |
| MAX4509CAE | MAXIMIC | Fault-protected, high-voltage dual 4-to-1 multiplexer. |
| MAX6320PUK34AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
