| Teil no | Hersteller | Application |
|---|
| MAX6307UK31D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.003(min),3.157(max).Nominal timeout period 20ms. |
| MXD1013SA090 | MAXIMIC | 3-in-1 silicon delay line. Output delay 90ns. |
| MAX6321HPUK46DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6310UK40D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.900(min),4.100(max). Nominal timeout period 1120ms. |
| MAX6302EPA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-high reset, open-drain reset output). |
| MAX441CPP | MAXIMIC | High-speed video multiplexer/amplifier |
| MAX1271BEAI | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1,-1 |
| MAX4534CPD | MAXIMIC | Fault-protected, high-voltage, single 4-to-1 multiplexer operated with +-4.5V to +-20V dual supply or a +9V to +39V single supply. |
| MAX4509CPE | MAXIMIC | Fault-protected, high-voltage dual 4-to-1 multiplexer. |
| MAX4589CWP | MAXIMIC | Low-voltage, high-isolation, dual 2-channel RF and video multiplexer. |
| MAX144BEUA | MAXIMIC | +2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-1 |
| MAX6315US40D4-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.00V. Reset timeout period(min) 1120ms. |
| MAX931EPA | MAXIMIC | Single low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference and internal programmable hysteresis.. |
| MXL1013AMJ8 | MAXIMIC | Dual precision op amp. |
| MAX6318MHUK32AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MX7543JCWE | MAXIMIC | CMOS serial input 12 bit DAC. Error +1 LSB. |
| MAX6357MTUT-T | MAXIMIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 3.08V (Vcc3). Active-low push-pull reset 3V. |
| MAX3181EEUK-T | MAXIMIC | +-15kV ESD-protected, 0.5microA,+3V to +5.5V, 1.5Mbps RS-232 receiver. |
| MX7541AKCWN | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1/2 LSB. |
| MAX3245CWI | MAXIMIC | 1microA supply current, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus |
| MAX6316LUK47CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX751CSA | MAXIMIC | +5V-output, step-up, current-mode PWM DC-DC converter. |
| MAX6345TUT-T | MAXIMIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 3.08V. Push-pull active-low reset output, push-pull active-high reset output. |
| MAX953EPA | MAXIMIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 1V/V. Supply current 5microA. |
| MAX6318MHUK30BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6359LRUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset 5V. Watchdog timer. |
| MAX6316MUK30CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX4581EEE | MAXIMIC | Low-voltage, CMOS analog multiplexer (8-channel). |
| MAX1241BCSA | MAXIMIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1 |
| MAX730ACSA | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept input between 5.5V and 11V and deliver 450mA for inputs above 6V. |
