| Teil no | Hersteller | Application |
|---|
| MAX695EPE | MAXIMIC | Microprocessor supervisory circuit. |
| MAX795SESA | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 2.85V to 3.00V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating. |
| MAX6309UK46D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.514(min),4.746(max) Nominal timeout period 140ms. |
| MAX6318LHUK29AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.930V min, reset timeout 1ms, typ watchdog timeout 102ms |
| MAX6316LUK38CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX538BCPA | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. 140microA supply current. Flexible output range 0V to 2.6V. |
| MAX632AESA | MAXIMIC | CMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 5% output accuracy. |
| MAX751EPA | MAXIMIC | +5V-output, step-up, current-mode PWM DC-DC converter. |
| ICL7665EPA | MAXIMIC | Microprocessor voltage monitor with dual overvoltage and undervoltage detection |
| MAX4274AKESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 4, 1+ (Rf/Dg) noninverting gain 5, -3dB BW 970kHz. |
| MAX1290ACEI | MAXIMIC | 400ksps, +5V, 8-channel, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1/2,-1/2 |
| MAX634CSA | MAXIMIC | CMOS micropower inverting switching regulator |
| MAX828EUK | MAXIMIC | Switched-capacitor voltage inverter. 12kHz. +1.5V to +5.5V input voltage range. |
| MAX3110ECNI | MAXIMIC | SPI/MICROWIRE-compatible UART and +-15kV ECD-protected RS-232 transceiver with internal capacitor. Single-supply operation +5V. Vcc (V) 5 |
| MAX173CNG | MAXIMIC | Complete 5 microsec CMOS 10-bit A/D converter. |
| MAX5158MJE | MAXIMIC | Low-power, dual, 10-bit voltage-output DAC with internal gain of +2V/V. +5V single-supply operation. |
| MAX704SMJA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX972MJA | MAXIMIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference none. Internal hysteresis no. |
| MAX6321HPUK40CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6337US19D2-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 1.9V, reset timeout(min) 20ms. |
| MAX792SCPE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.91V |
| MAX806TCSA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX1091BEEI | MAXIMIC | 250ksps, +3V, 8-channel single-ended/4-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 1 |
| MAX6316LUK40CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX692AC/D | MAXIMIC | Microprocessor supervisory circuit. 4.40V precision supply-voltage monitor |
| MAX4606CSE | MAXIMIC | Low on-resistance (5om max), quad, SPST, CMOS analog switches (two NO and two NC switches). |
| MAX3488ECSA | MAXIMIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0.25Mbps. Supply voltage 3.0V to 3.6V |
| MAX392CUE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX6307UK44D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.270(min),4.490(max).Nominal timeout period 140ms. |
| MAX310MJE | MAXIMIC | CMOS RF/video multiplexer (1-of-8). |
