| Teil no | Hersteller | Application |
|---|
| MAX520BEWE | MAXIMIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| MAX4175ALEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 5, 1+ (Rf/Dg) noninverting gain 6, -3dB BW 790kHz. |
| MAX6376UR26-T | MAXIMIC | Ultra-low-power voltage detector, 2.6V |
| MAX6012AEUR-T | MAXIMIC | Precision, low-power, low-dropout, SOT23-3 voltage reference. Output voltage 1.250V, input voltage 2.5V to 12.6V. |
| MAX4126EUA | MAXIMIC | Dual, wide-bandwidth, low-power, single-supply Rail-to-Rail I/O op amp. BW 5MHz. |
| MAX6318LHUK46BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 20ms,typ watchdog timeout 6.3ms |
| MAX305EPE | MAXIMIC | Precision, dual, high-speed analog switch. |
| MAX6336US21D1-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 2.1V, reset timeout(min) 1ms. |
| MAX1245ACAP | MAXIMIC | +2.375V, low-power, 8-channel, serial 12-bit ADC . |
| MX7528CQ | MAXIMIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB. |
| MAX381C/D | MAXIMIC | Precision, low-voltage analog switch. |
| ICM7240C/D | MAXIMIC | Programmable timer/counter |
| MX7225KEWG | MAXIMIC | CMOS quad 8-bit D/A converter with double-buffered logic inputs. Error +-2 LSB. |
| MAX500ACPE | MAXIMIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-1. |
| MX7828KEAI | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
| MAX6312UK37D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.608(min) 3.793(max). Nominal timeout period 20ms. |
| MAX4125EUA | MAXIMIC | Single, wide-bandwidth, low-power, single-supply Rail-to-Rail I/O op amp. BW 25MHz. |
| MAX812MEUS-T | MAXIMIC | Microprocessor voltage monitor with manual reset input. Reset threshold voltage 4.38V. Push-pull active-high reset output. |
| MAX4051ACSE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
| ICL7616DCSA | MAXIMIC | Single operational amplifier, 15mV |
| MAX6320PUK43AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX6314US33D4-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 1120ms. |
| MAX6320PUK43AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| DG445CJ | MAXIMIC | Improved, quad, SPST analog switch |
| MAX8864SEUK-T | MAXIMIC | Low-dropout, 120mA linear regulator with auto-discharge function. Preset output voltage 2.84V |
| ICL7652BCTV | MAXIMIC | Chopper-stabilized operational amplifier |
| MXL1007CN8 | MAXIMIC | Low-noise, precision operational amplifier. |
| MX7534KP | MAXIMIC | Microprocessor-compatible, 14-bit DAC. INL +-1 LSB. |
| MAX159BCUA | MAXIMIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 1 |
| DG408DJ | MAXIMIC | Improved, 8-channel CMOS analog multiplexer |
