| Teil no | Hersteller | Application |
|---|
| MAX806RESA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX544BEPA | MAXIMIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1 |
| MAX6306UK28D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.730(min),2.870(max) Nominal timeout period 140ms. |
| MAX893LESA | MAXIMIC | 1.2A, current-limited, high-side P-channel switch with thermal shutdown. On-resistance 0.07omega |
| MAX6318MHUK33BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX6314US32D2-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.20V. Reset timeout period(min) 20ms. |
| MAX6321HPUK40AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MX7534BD | MAXIMIC | Microprocessor-compatible, 14-bit DAC. INL +-1 LSB. |
| MAX6320PUK28DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX5152ACEE | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +5V single-supply operation. INL(LSB) +-1/2. |
| MAX6317HUK29AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| IH5045CJE | MAXIMIC | General-purpose CMOS analog switch. Dual, double pole, single throw (Dual DPST) |
| MAX4541EUA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX6318MHUK26DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX196ACNI | MAXIMIC | Multirange, single +5V, 12-bit DAS with 12-bit bus interface |
| MAX825SEUK | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 2.93V. Active-low reset. Active-high reset. Manual reset input. |
| MAX6318MHUK35BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX151BEWG | MAXIMIC | 300kHz 10-bit A/D converter with reference and T/H. TUE 1.5 LSB. |
| MAX545ACPD | MAXIMIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1/2 |
| MAX6318LHUK39BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.900V min, reset timeout 20ms,typ watchdog timeout 6.3ms |
| MAX4042EUA | MAXIMIC | Single/dual/quad, low-cost, micropower rail-to-rail I/O op amp. |
| MAX6364LUT26-T | MAXIMIC | Low-power microprocessor supervisory circuit with auxiliary adjustable reset input. Reset threshold(typ) 2.63V. Active-low push-pull reset. |
| MAX4590CPE | MAXIMIC | 1.25om, dual SPST, CMOS analog switch. Two NO (normally open) switches. |
| MAX6315US46D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.63V. Reset timeout period(min) 20ms. |
| MAX818MCSA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.40V, active-low reset, backup-battery switchover, watchdog input, battery freshness seal, chip-enable gating. |
| MAX156AEWI | MAXIMIC | 4-channel ADC with simultaneous T/Hs and reference. Error +-1/2 LSB. |
| MAX6321HPUK50CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX4051AMJE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
| MAX6316LUK42DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX805RMJA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
